user manual

Issue 3 EliteMail VMS/EliteMail Limited
1 - 4 Programming
Assign DVM Extensions to Hunt
Program Memory Block 4-14, Intercom Master Hunt Number. This
program assigns the first DVM extension as the pilot number as follows:
1. Press LK4.
2. Dial
.
3. Press
followed by the port number of the first DVM
extension.
4. Press LK2 to assign the DVM port as master hunt.
5.
to write data.
Program Memory Block 4-15, Intercom Master Hunt Number Forward
Assignment. Assign this number as follows:
1. Enter the extension number of the second DVM port.
2.
.
3. Press
.
4. Dial
.
5.
.
6. Enter the extension number of the next
DVM port.
7. Repeat Steps 2~6 for each DVM extension.
8.
to write data.
9.
.
DIT Assignment
Program Memory Block 3-42, DIT Assignment. This program sets up the
DVM to be an automated attendant as follows:
1. Press LK3.
2.
.
3. Dial
.
4. Press
followed by the first CO line to ring to the
DVM.
5. Enter the extension number of the first DVM port.
6.
to write data.
7. Press
.