user manual

ND-45504 (E) CHAPTER 4
Page 45
Revision 2.0
PZ-PW86 (PWR)
(3) Switch Settings
The figure in the SWITCH NAME column and the position in in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
Switch Settings
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
1
Set to ON.
2
ON
Standard setting (for equalize charging)
OFF
Not used
SW
ON
For turning AC source power on
OFF
For turning AC source power off
100/120
240
AC INPUT: 90 V - 138 V
DOWN
AC INPUT: 180 V - 276 V
CAUTION
• When the operating power is being supplied to this circuit card, do not plug/unplug this circuit card into/from
its mounting slot.
• Set the appropriate voltage by using the AC voltage select switch (slide switch) before powering on.
1
2
ON
ON
I (ON)
O (OFF)
UP