user manual

ND-45504 (E) CHAPTER 4

Page 43

Revision 2.0

PN-PW00 (EXTPWR)

(3) Switch Setting

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col-

umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and

, the setting of the switch varies with the system concerned.

Note:

When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit card.

Switch Settings

SWITCH

NAME

SWITCH

NUMBER

SETTING

POSITION

FUNCTION

CHECK

MB (Toggle SW)

Note

For make-busy (–48 V power off)

For normal operation (–48 V power on)

DOWN