user manual

ND-45504 (E) CHAPTER 3
Page 13
Revision 2.0
2.4 PN-BS00-A/PN-BS00-B (BS00), PN-BS01-A/PN-BS01-B (BS01)
1. In a one-PIM system, neither the PN-BS00-A/PN-BS00-B nor the PN-BS01-A/PN-BS01-B is needed.
2. When the system is equipped with more than one PIM, mount a PN-BS00-A/PN-BS00-B in the BUS slot
of PIM0 or PIM(H)0.
3. When the system is equipped with more than one PIM, mount one PN-BS01-A/PN-BS01-B in the BUS
slot of PIM1 through PIM7, as required.
Figure 3-4 BS00/BS01 Card Mounting Slots
2.5 PN-PW00 (EXTPWR)
Mount the PW00 card into the LT01-AP8 slot. A maximum of three PW00 cards can be mounted in one frame
(4PIMs).
Note:
The PW00 card occupies the adjoining left side (smaller number) slot because of its two-stories structure.
2.6 PZ-PW86 (PWR)
Mount one PZ-PW86 in the PWR slot of PIM0/PIM(H)0 through PIM7, as required.
PIM3 PIM7
B
S
0
1
B
S
0
1
PIM2 PIM6
B
S
0
1
B
S
0
1
PIM1 PIM5
B
S
0
1
B
S
0
1
PIM0 PIM4
B
S
0
1
B
S
0
0
or
PIM(H)0