user manual

ND-45504 (E) CHAPTER 4

Page 97

Revision 2.0

PN-SC03 (ICH)

(3) Switch Settings

The figure in the SWITCH NAME column and the position in in the SETTING POSITION col-

umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and

, the setting of the switch varies with the system concerned.

Note 1:

Set the groove on the switch knob to the intended switch position.

Note 2:

When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the circuit

card.

Switch Settings on ICH Card

SWITCH

NAME

SWITCH

NUMBER

SETTING

POSITION

FUNCTION CHECK

SENSE

(Rotary SW)

Note 1

4 ~ F Set the switch to match the AP Number (04 ~ 15) to be set by CM05.

0 ~ 3 Not used

MB (Toggle SW)

Note 2

For make-busy

For normal operation

AP No.

SW No.

1004 05 06 07 08 09 11 12 13 14 15

456 789ABCDEF

DOWN