User’s Manual E655 E585 E505 E425 E325
Index Precautions And Reminders ���������������������������������������������������������������� English-1 Important Safety Instructions ��������������������������������������������������������������� English-2 Important Information �������������������������������������������������������������������������� English-5 Declaration Of Conformity ������������������������������������������������������������������English-11 Contents ����������������������������������������������������������������������������������
Do not place the TV in confined spaces or in a box when in use. Maintain ample ventilation for the TV when in use. Do not open the TV cabinet. Call a NEC certified service personnel for any internal service needed for your TV. Keep the TV away from direct sunlight, dust, humidity, smoke and oily areas. Unplug immediately if the TV falls. Unplug immediately if there is a TV malfunction such as a loss of audio / video, the presence of smoke, or a bad odor coming from the TV.
Important Safety Instructions Read before operating equipment Follow all warnings and instructions marked on this TV. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
NOTE: To the TV system installer: This reminder is provided to call attention to Article 820-44 of the National Electric Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the facility, as reasonably close to the point of cable entry as possible English-3 English 17. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer. 18.
WARNING: To prevent the apread of fire, keep candles or other open flames away fram this product at all times. IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television. • Only using furniture that can safely support the television.
English Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
Power source This LCD TV operates on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volts 60 Hz outlet. The mains plug is used as the disconnect device and shall remain readily operable. To prevent electric shock from the TV, do not use with an extension cord, receptacle, or other outlet unless the blades and ground terminal can be fully inserted to prevent blade exposure. Never connect the LCD TV to 50 Hz, direct current, or anything other than the specified voltage.
• Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed.
Install on the wall 11 7/8 inches 30 cm 4 inches 10 cm 4 inches 10 cm Leave at least this space around the set. 4 inches 10 cm 2.36 inches 6 cm For use only with UL Listed Wall Mount Bracket with minimum weight / load: Please refer to the Specification on page 38 and page 41 . Unit without base weight: The equipment and its associated mounting means still remain secure during the test.
English Installed with stand 11 7/8 inches 30 cm 4 inches 10 cm 4 inches 10 cm Leave at least this space around the set. 4 inches 10 cm Never install the TV set where air-circulation is blocked. Objects and ventilation holes Never push objects of any kind into the TV through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or an electric shock. Do not place any objects on the TV.
License Notice and Trademark Acknowledgement Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners. ® HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.
FCC Information: 1. Use the attached specified cables with the E655/E585/E505/E425/E325 color monitor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use the supplied shielded video signal cable, Mini D-SUB 15 pin to Mini D-SUB 15 pin. 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
English Contents Your new NEC monitor box*1 should contain the following: • • • • • • Monitor (1) Remote control (1) 1.5 V AAA batteries (2) Power cord (1) D-sub cable (1) User’s manual (1) E655 Wireless Remote Control and AAA Batteries Power Cord E585 / E505 / E425 / E325 User’s Manual Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) User’s Manual NOTE: *1: Remember to save your original box and packing material to transport or ship the monitor.
Preparation IMPORTANT: Do not apply pressure to the TV screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. Attaching the Base E655 Stand Screw x 4 E655:M6 (16mm) E585 Stand Screw x 6 E585:M4 (14mm) E505 / E425 / E325 Stand Screw x 4 E505:M6 (20mm) E425/E325:M4 (20mm) 1. Place the TV face down on a soft and flat surface to prevent scratching and damage. 2.
English Using Cable Clamper Tie the cables together using the cable clamper. Preparing Your LCD TV For Wall Mounting (optional) We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the base. For your safety, only mount with a UL listed wall mount bracket that supports the weight of the TV.
E585 E505/E425/E325 VESA Hole VESA Hole Neck Screw Neck Screw 1. Loosen the screws on the button of the base, and remove the base. 2. Secure the wall mount bracket to the back of your TV using four M4 screws (for 32"/42" only) or M6 screws (for 50"/58" only). screen size (inches) required pitch (mm) VESA Hole depth 58 400 × 400 4 × M6 (22mm) 50 200 × 400 4 × M6 (15mm) 42 200 × 200 4 × M4 (15mm) 32 100 × 100 4 × M4 (12.
Ensure that the LCD TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. Do not place the TV near any open flames. Do not allow the TV to be placed in an environment where it can be exposed to heat, direct sunlight, or rain and water. Do not expose the equipment to any liquid.
Battery Installation and Replacement The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Open the battery cover of the remote control by pushing and pulling it in the direction of the arrow. 2. Insert two new “AAA” size batteries for the remote control. When replacing old batteries, push them towards the springs and lift them out. 3. Match the batteries to the (+) and (-) marks in the battery compartment. 4.
Press the power button on the remote control or press the power button located on the side of the TV. The TV will power on. Power button or Power Mode Status Mode On Standby Warming up LED Status None Red Blinking Red When in on mode, the Monitor operates as follows if no external signal is input. 1. When the external device is connected to the VGA terminal, the NO SIGNAL menu is displayed and 15 seconds later the Monitor switches to warming up mode. 2.
4. In standby mode, press the power button on the remote control or on the side panel to switch the Monitor to on mode. NOTE: Note that in standby mode, the Monitor does not switch automatically to on mode even if a signal is input from an external device using VGA, HDMI, component video or composite video. If the power cord is unplugged during standby mode, the Monitor will starts in the same standby mode the next time it is turned on.
English Source Connection Guide E655 AC POWER ❶ ❷ ❸ ❼ ❻ ❺ ❹ 1. RS-232C – Connect to your PC, and receive the control commands from the PC. 2. HDMI (HDMI1, HDMI2, HDMI3) – Connect to your HDMI devices. 3. USB port – Used for accessing photo, music, and movie files. 4. PC IN (VGA / AUDIO) – Connect to your PC video and audio. 5. ANT / CABLE – Connect to an RF antenna or Analog Cable system. 6.
E585 AC POWER ❶ ❷ ❸ ❼ ❻ ❺ ❹ 1. RS-232C – Connect to your PC, and receive the control commands from the PC. 2. HDMI (HDMI1, HDMI2, HDMI3) – Connect to your HDMI devices. 3. USB port – Used for accessing photo, music, and movie files. 4. PC IN (VGA / AUDIO) – Connect to your PC video and audio. 5. ANT / CABLE – Connect to an RF antenna or Analog Cable system. 6.
English E505 / E425 / E325 AC POWER E325 / E425 E505 ❶ ❷ ❸ ❼ ❻ ❺ ❹ 1. RS-232C – Connect to your PC, and receive the control commands from the PC. 2. HDMI (HDMI1, HDMI2, HDMI3) – Connect to your HDMI devices. 3. USB port – Used for accessing photo, music, and movie files. 4. PC IN (VGA / AUDIO) – Connect to your PC video and audio. 5. ANT / CABLE – Connect to an RF antenna or Analog Cable system. 6.
Once your AV device is connected, press the Source button on the remote control to select the relevant source to view. (ex: Press COMP button to select “Component” if you have connected a source to the Component input.
Using The Side Panel Controls 1. VOL + Press to increase the volume. Press this button to shift Right in the OSD menu. 2. VOL - Press to decrease the volume. Press this button to shift Left in the OSD menu. 3. CH Press to change channels. Press this button to shift up in the OSD menu. 4. CH Press to change channels. Press this button to shift down in the OSD menu. 5. MENU Press to open or exit the OSD (On-Screen Display) menu. 6. INPUT Press to select the input source. 7.
Using The Remote Control (Power) Press to turn On/Off (standby) the power. (NOTE: To completely turn off the power, unplug the power cord from the power outlet.) TV Press to choose ATSC/NTSC tuner source mode. AV Press to choose Composite source mode. PRE CH COMP Press to choose Component source mode. HDMI/PC Press repeatedly to choose PC IN or HDMI source mode. 0~9/─ Press to select channel (Press "─" to choose the sub-channel). PRE CH Press to display the previous channel.
Wide Press to choose the display aspect ratio: Normal / Zoom / Wide / Cinema / Auto (Ratio availability varies by video inputs.) Audio Press to choose sound mode: Standard / Movie / Music / News / Custom. CH-List Press to display the Channel List. CC Press to activate the Closed Caption. Picture Press to choose the picture mode: Dynamic / Standard / Energy Savings / Theater / Game (Only for E655 model) / Custom.
Timing Table FHD (E655/E585/E505/ E425) WXGA (E325) Resolution Horizontal Vertical Nominal Nominal Sync Sync Freq. Freq. Polarity Polarity (kHz) (Hz) Nominal Pixel Clock (MHz) VGA DVI VGA DVI 640 × 480@60Hz ● ● ● ● 31.469 – 59.94 – 25.175 720 × 400@70Hz ● ● ● ● 31.469 – 70.087 + 28.322 800 × 600@60Hz ● ● ● ● 37.879 + 60.317 + 40 1024 × 768@60Hz ● ● ● ● 48.363 – 60.004 – 65 1280 × 720@60Hz ● ● ● ● 45 – 60 + 74.25 1280 × 800@60Hz ▲ ▲ ● ● 49.
Press the Menu button to display and Exit button to close the main menu. Use the Navigation Ring to navigate, select, adjust or confirm an item on the OSD (On-Screen Display) menu. NOTE: Some features may only be available in a particular source mode. [Tint] Video Menu Adjust the hue (Red, Green, Video Menu adjusts video items. Blue) of the picture from R50 ─ G50.
Audio Menu Audio Menu provides an audio adjustment for user to modify the audio setting. Sound Mode Video Standard 0 Balance Audio Advanced Audio Channels Reset Audio Settings Setup USB Adjust settings to affect sound quality. MOVE OK SELECT 4. Reset Audio Settings Reset Audio settings to factory default settings. Channels Menu Channel Menu allows you to set your signal source options.
Setup Menu Setup Menu in TV mode is shown below. According to various requirements in different source modes, certain features could be hidden (disabled) on the menu. Menu Language Video English Parental Controls Audio Closed Caption Sleep Timer Channels Off Input Labels Setup Energy Options Auto Power Down USB Home Off Set various monitor options.
[Current Time] 6. Energy Options Home mode is intended for Set the current time before using home use, and will save much this function. energy. In this mode, the Monitor [Power On] automatically switches to power Set the time for your TV to turn saving mode when no external on. signal is input. [Power Off] Retail mode is a relatively more Set the time for your TV to turn energy consuming mode. off. In this mode, the Monitor does not switch to power saving mode 11.
To control while viewing photos: You could browse images, listen to musics, or play videos from USB device. USB Video • Select or press ►/p button to play image slideshow. • Select or press ►/p button to pause the playing image. • Select or press ◄ button to go to previous image. • Select or press ► button to go to next image. • Select or press S button to stop the playing image slideshow. • Select or press Display button to show the playing image's information.
• Select or press S button to stop the playing file. • Select or press Display button to show the playing file's information. • Select to repeat files in the folder. R_None / R_One / R_All • Select to mute while playing the music file. • Press Wide button to choose the display aspect ratio while playing the video file. 4:3 / 16:9 / Auto Stop Info. Repeat Mute off Data Format for USB Supported file FAT16/32 system Max. folder layer 9 PHOTO mode Data format JPEG, JPG, JPE Max.
Care Of The Screen Do not rub or strike the screen with anything hard as this may scratch, mar, or even damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners, aerosol cleaners, or solvents of any kind.
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
This model complies with the specifications listed below. Reorient or relocate the receiving display. Designs and specifications are subject to change without notice. This model may not be compatible with features and/or specifications that may be added in the future. Model Name E655 E585 DISPLAY Viewable 65” 58” Resolution 1,920 × 1,080 Color Over 16 million colors (depending on video card used) 31 ─ 83 KHz (Analog input) 15.625/15.
Model Name E655 E585 WEIGHT & DIMENSION Dimensions w/ Stand and Base (W × H × D) (inch) 57.77 × 36.38 × 14.17 51.24 × 31.46 × 13.75 Dimensions w/o Stand and Base (W × H × D) (inch) 57.77 × 34.34 × 3.94 51.27 × 29.89 × 4.29 Weight w/ Stand and Base (lbs) 77.1 lbs 48.4 lbs Weight w/o Stand and Base (lbs) 66.3 lbs 46.64 lbs WALL MOUNTING VESA-compatible wall bracket (W × H) 400 × 400 mm 400 × 400 mm Screw type Metric 6 Metric 6 POWER Power Consumption 248 W 143 W Standby < 0.
E655 E585 PACKAGE CONTENTS Supplied Accessories Monitor (1) Remote control (1) 1.5 V AAA batteries (2) Power cord (1) D-sub cable (1) User’s manual (1) All specifications, weights, and dimensions are subject to change without prior notice. Please access www.necdisplay.com for detailed specifications and dimensions for custom installations.
Model Name E505 E425 E325 DISPLAY Viewable 50” Resolution 1,920 × 1,080 Color Over 16 million colors (depending on video card used) Horizontal: Frequency Vertical: 42” 32” 1,366 × 768 31 ─ 83 KHz (Analog input) 15.625/15.
E505 E425 E325 WEIGHT & DIMENSION Dimensions w/ Stand and Base 44.25 × 26.93 × (W × H × D) (inch) 10.04 Dimensions w/o Stand and Base (W × H × D) (inch) 37.80 × 23.30 × 10.04 28.62 × 18.16 × 10.04 44.25 × 25.47 × 3.03 37.80 × 21.87 × 3.02 28.62 × 16.71 × 3.02 Weight w/ Stand and Base (lbs) 29.8 lbs 18.7 lbs 11.73 lbs Weight w/o Stand and Base (lbs) 17.6 lbs 10.65 lbs 28.
Model Name E505 E425 E325 PACKAGE CONTENTS Supplied Accessories Monitor (1) Remote control (1) 1.5 V AAA batteries (2) Power cord (1) D-sub cable (1) User’s manual (1) All specifications, weights, and dimensions are subject to change without prior notice. Please access www.necdisplay.com for detailed specifications and dimensions for custom installations. NOTE: Model Name E505 E425 E325 TV Base stand Screw X X X Neck Screw X X X M6 (15mm) M4 (15mm) M4 (12.
PC control of the TV Attach an RS-232C cable cross-type (commercially available) to the supplied RS-232C for the connections. NOTE: This operation system should be used by a person who is accustomed to using computers. Communication procedure Send the control commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time.
Before Calling Service Please make these simple checks before calling service. These tips may save you time and money as charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms “Ghost ” or double image when using the tuner No power No picture Good picture but no sound Items To Check And Actions To Follow • This may be caused by an obstruction to the antenna due to high rise buildings or hills.
HDTV HDTV displays are technically defined as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs are located on the receiver. These connectors are used for the input of audio and video signals. Designed to receive higher picture resolution and offer sound connection options. Menu An on-screen listing of features shown on the TV screen is made available for user adjustments.
Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS’ sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
English-47 English This Product is warranted in accordance with the terms of this limited warranty. Consumers are cautioned that Product performance is affected by system configuration, software, the application, customer data, and operator control of the system, among other factors, While NEC DISPLAY SOLUTIONS Products are considered to be compatible with many systems, specific functional implementation by the customers of the Product may very.
References NEC Monitor Customer Service & Support Customer Service and Technical Support Parts and Accessories (800) 632-4662 (888) 634-4662 Fax (800) 695-3044 Warranty Information www.necdisplay.com Online Technical Support www.necdisplay.com Sales and Product Information Sales information Line (888) 632-6487 Canadian Customers (866) 771-0266, Ext#: 4037 Government Sales (800) 284-6320 Government Sales email gov@necdisplay.com Electronic Channels http://www.necdisplay.com Product Registration http://www.
