Model name: e353
File name: e353.pdf Software version: No. Date Phone File name Reviewed by 1 2005 JUL 22 e353_v1.pdf APT 2 2005 Aug 30 e353_v12.pdf NMP 3 2005 Sept 8 e353_v13.
Copyright Notice Windows® XP and Windows® 2000 are registered trademarks of Microsoft Corporation in the United States and/or other countries. This product contains NetFront Internet browser software of ACCESS CO.,LTD. This product contains JV-Lite2 Java virtual machine of ACCESS CO.,LTD. This product contains AVE-SSL encryption module of ACCESS CO., LTD. ACCESS, NetFront, JV-Lite and AVE are trademarks or registered trademarks of ACCESS CO., LTD. in Japan and other countries.
This User Manual is printed by NEC Mobile Communicate Corporation without any warrant. NEC Mobile Communication Co., Ltd reserves the right to modify or improve this Manual for any printing error, discrepancy from the latest data, program and equipment any time without separate notice, which, however, will be incorporated into the latest version of the User Manual. Note: Some services/functions hereunder are not necessarily supported by all networks, such as 112, the international emergency call number.
Important Safety Information 1 Start-up 5 e353 Overview ..........................................................................5 Definitions of Buttons ................................................................6 Status Icons ...............................................................................8 USIM Card and Battery ...........................................................10 Charging Method ................................................................
Important Safety Information Emergency services To make an emergency call in any country • Ensure that your e353 is switched on and in service. • Press the Send key to return to the Home screen if needed. • Press 112 (or 999 within the UK or 000 in Australia) followed by the Send key. (When the USIM card is not inserted or when the dial lock function is on, press the SK2 (EMRGCY). When the dial lock function is on, press 112 and SK1 (YES).
• When the battery is thrown away, be sure it is non-conducting by applying vinyl tape to the (+) and (-) terminals. • Do not disassemble or modify the battery. • Do not solder the battery directly. • Stop using the battery if you detect any abnormalities, such as odour, discolouration or heat during use, charge or storage. • Do not use the phone with a damaged or misshapen battery. • In the unlikely event of a battery leak, take care to keep the battery discharge away from your eyes or skin.
• Do not use the phone where blasting is in progress. • The operation of some medical electronic devices, such as hearing aids and pacemakers, may be affected if you use a mobile phone next to them. Observe any warning signs and the manufacturer's recommendations. • Your phone contains metal which may cause a skin irritation, a rash or eczema. Road safety • You MUST exercise proper control of your vehicle at all times. Give your full attention to driving.
Exposure to radio frequency energy • The phone is designed not to exceed the limits for exposure to RF energy set by national authorities and international health agencies.* These limits are part of comprehensive guidelines and establish permitted levels of radio wave exposure for the general population.
1. Start-up 1.
1.
Left/RSK keys LSK key Idle mode: enter into the menu, hold it to decide whether to lock the e353 keyboard, press [LSK] and "*" key to unlock the keyboard Menu mode: Select menu or pop-up menu Editing mode: switch over the input methods RSK key Idle mode: enter into WAP browser Menu mode: back to the last page Editing mode: clear off text and characters OK KEY Direction key Idle mode: initiate picture-taking pre-view mode Menu mode: select menu or confirm options Upper navigation key Idle mode: direct
1.
15 Meeting mode Display the Phone mode Pocket mode Car mode Normal mode and incoming call transfer Phone mode and incoming call transfer Meeting mode and incoming call transfer Pocket mode and incoming call transfer Car mode and incoming call transfer 16 Alarm clock Initiate the alarm clock 17 Display network coverage (i.e. USIM card) types Display 3G USIM card in 3G network Display 2.
19 USB connection Display USB data line connected 10 1 Line attach Display data connection to the network 11 1 Signal display Display failure to receive network signals Display weak or strong signals 1.4 USIM Card and Battery USIM card (user ID mode) incorporates MP number and service items, and can store phone numbers and personal data. Caution: Place USIM card beyond the reach of children.
Caution: The system environment, MP configuration and game functions can all impact the idle-mode duration. Caution: Battery Performance and Maintenance 1. 2. 3. The e353 is charged by rechargeable charger. Please note that the new battery can reach the best performance after two or three full charging-discharging cycles. The battery can sustain hundreds of charging-discharging cycles before out of service.
2. Basic Functions Caution: The e353 supports audio and video session in 3G network, and supports only audio session in GSM network. 2.1 On/off Power on Press [Power] for 2-3 seconds to power on e353 while hearing the power-on tone and seeing power-on animation or text. Then the e353 will prompt you to input PIN code if applicable. It will prompt you to input the lock password if applicable. When not inserting USIM card, the e353 will prompt you to insert the card, but allow calling of emergency numbers.
2.3 Outgoing Call Number Keys The max number can be inputed in the idle screen is 57 digits and user can’t change to another line manually. Input phone number in the idle screen with number keys, then press [send key], then dial the audio call to such number; dial video call to such number by pressing [OK]. One-key dialing In idle mode, hold “1” to dial audio voice mail. In idle mode, hold number keys 2-9, directly dial the numbers 2-9 stored in USIM card by audio call.
2. Then press "send key" to dial the number, MP will automatically dial the extension number when connected with the telephone exchange. Emergency call Your service provider configures your MP with one or more than one emergency numbers (e.g. 112). In the service coverage area, the users can input the emergency number, and then press the send key to call emergency numbers even without the USIM card. Caution: The function entails the network support. 2.
Mute During the session, press [LSK] to enter into in-session menu; in case of suspension of the mike, select "Mute" when the other party cannot hear you; to restore the session, press [LSK] and select "turn off silent tone". New SMS In one call, two calls or telephone conference, press [LSK] to enter into the in-session menu, select new SMS, and conduct relevant operations; you can edit it or make selections in the phone book. Hand-free session In the session, press [OK] for hand-free session.
2.7 Functions in Video Session Caution: Video phone session is only available in 3G network. Hand-free Session In the session, press [OK] to realise hand-free function, or press "LSK key" to enter into the in-session menu to select the hand-free option. Front camera/Rear camera The MP supports dual lens; in the session, press "LSK key" to enter into the in-session menu to select "Front camera" or "Rear camera" for video session.
3. Main ˊ Menu Press [LSK] in the idle screen. In the main menu, select the 9 options by [direction navigation key]: 1. Settings 2. Message 3. Web Brower 4. Phone book 5. Camera 6. My data 7. Java™ 8. Accessory 9.
Press [direction navigation key] to switch over the sub-menus, then press [OK] or relevant number key for confirmation. Note: 1. 2. If the wallpaper is calendar, banner won't be disapplyed. [9. SIM toolkit] display will vary with USIM cards. 3.1 Settings The default configuration of your MP will enable to use the functions immediately after inserting USIM card. For more needs and application modes, this MP allows you to define and change the setting for your habits to meet senior communication needs. 1.
4. - Set date: allows input of correct date; - Set time format: adjust the date display format in12/24-hour system; - Set date format: adjust the date display formats of 6. Language: Configure the current menu and prompt language as English and Italian. 2. Phone modes 1. Select mode In the scene mode screen, enter into [select mode], select an option among Normal Mode, Meeting Mode, Pocket Mode or Car Mode. Then the MP will follow the selected mode in operation. 2.
- Backlight setting: setting of backlight brightness, high, middle and low levels. - Backlight timer: setting of backlight duration. 5. Calls 1. Call divert A network function for forwarding the call to designated phone as requested by the user. Upon the setting, MP requires you to input the designated number to receive the call. If failing to receive the transferred call, please check the destination number. - Divert always: with the setting, all incoming calls will be transferred to designated number.
6. Security Safety setting can configure and modify passwords and options to prevent non-authorized use of MP and restriction of MP use, including initiating PIN code, modifying PIN code, power-on locking, modifying MP lock password, present locking and FDN. - PIN activate: With PIN code function, input the PIN code upon power on. In case of inputting three wrong PIN codes in a row, the USIM card will be automatically locked and display the locking information.Initial PIN code is 0000.
1. Camera settings: Setting of camera parameters in video session. - Screen mode: setting of the screen display in video session, including my side is smaller, my side is larger, Other side only, my side only. - Picture quality: configure the display speed of the picture, including Standard, Better picture, Faster movement. - Camera mode: setting of camera display mode, including default, sepia and night. 2. Video call options: Setting of picture display, including video settings and show timer.
2. In the new short message interface, select "add receivers" to input new numbers, press [down navigation key] to select from the phone book list; select "short message content" to enter into the text editing interface and input short message contents. 3. In the new short message interface, press [LSK] to pop up the menu, press [up and down navigation key] to select [send] or [save]. [send]-the MP will send out the short message to the number. [save]-store the message into the "draft box" list. 4.
3. Voice mail By "voice mailbox" function, you may forward the incoming calls to the voice mail center, and the calling party can leave a message in the mailbox, when you will receive the notice message. The service provider can provide such number to you, and you can configure and modify the number. 4. Settings Short message setting, including short message service center, short message valid term, status report, storage type, community broadcast, templates.
In the "Create SMIL" editing interface, you can insert picture, tone and text.You can edit slide timing. Press [LSK] pop-up menu, Press [up and down navigation key] to switch over among the following options: [Remove]: remove picture, tone, or text, [Add Slide]: add new frame. [Insert Slide]: insert a frame between two. [Delete Slide]: delete a frame. [Preview Slide]: pre-view the frame. [Preview]: pre-view all contents and effect of the SMIL.
Edit: re-edit MMS content. Delete: delete selected MMS from the Drafts. All delete: delete all MMS in the Drafts. Sort: queue the MMS as requested. Filter View: extraction of specified message - Sent : store MMS successfully sent out. In the message list, press [LSK] pop-up menu for operation below: Open: read the sent messages. Edit: re-edit MMS content. Delete: delete selected MMS from the sending box. Delete All: delete all sent SMILs. Sort: queue the MMS as requested.
You shall follow the steps below prior to using WAP functions: 1. Apply for WAP services; contact your network service provider for specifics of WAP services. 2. Make necessary WAP setting on your MP by referring to the data statistic setting or proxy. Activate WAP browsing webpage: 1. In the idle screen, press [RSK] to enter into WAP home page. 2.
6. Protect On/Off: configure whether to activate protection; in case the protected pages exceed the maximum setting, you shall not configure protection. 7. Unprotect All: cancel all protection setting of pages. 4. Push Messages Store received Push messages, and can browse them. 5. Options 1. Home: edit address and set as home, configure home page address. 2. View: configure view format, script text, animation, picture and table. 3.
2.In the menu mode, press [direction navigation key] to scroll to [4 phone book], then press [OK] for confirmation (or directly press [number key 4]). 1. Lists The list records the information of contacts, including names, number, mobile number and etc; input the contact information for calling and sending short messages. You can store the phone book or the names to the MP storage (internal phone book) or USIM card (USIM phone book).
In "contact items" screen, select [LSK] to pop up the menu, press [direction navigation key] for scrolling selection of "searching".
8. Memory status The MP is equipped with memory status inquiry function to enable you to understand the operation status of the MP. The storage status inquiry primarily covers recording capacity in USIM card, MP, FDN, SDN and the used capacity. 9. Function menu of contact details In contact list, select the highlighted item, the screen will display detailed contact information; select [LSK] for pop-up menu, press [direction navigation key] to select: - Edit: edit all items.
- Delete all: delete all contents in the contact list. 3.5 Camera You can take pictures or film of those around you, which can be automatically stored in "my data". The pictures can be sent to others by MMS. You can use the picture as the wall paper, or configure the picture as the head portrait of certain contact in the phone book. The picture and film are stored in Jpeg and 3GP format. 1. Initiate camera/shooting function 1. In idle screen, press [OK] for taking pictures. 2.
1. Zoom In view-finding screen, press [up and down navigation key] to adjust focus. 2. Adjust brightness In view-finding screen, press [left/right navigation key] to adjust brightness. 3. Camera function options Prior to taking pictures In view-finding screen, press [LSK] to pop up the menu, then press required key for desired options.
1. Front camera: when the view frame adopts front lens/back lens, the item in the menu display back lens/front lens; when selecting the item, return to the view frame interface, which displays the view of back lens/front lens. 2. Photo mode: initiate shooting function 3. Zoom: setting of focus adjustment levels, i.e. x1, x2 and x4; 4. Video size: setting of picture sizes, i.e. QCIF (176×144) and SubQCIF (128×96). 5. Quality: 3 levels, normal, fine and super fine. 6.
confirmation.(or directly pressing [number key 6]).In the idle screen, press [Down navigation key] to directly enter into My Data interface. 1. Movies The clip stores the film clips; press [LSK] in the film list screen for options below: View: pre-view the film by pressing [OK] to suspend it and then press [OK] for pre-view. Send by MMS: send the film out in the form of SMIL. Rename: rename the film. Sort by: queue the films as per name, size or date. Delete: delete current files.
Set message tone: configure the sound as message tone. Property: display file name, size, date and time etc. 4. Others Store the text downloaded and from MMS. 5. Memory status You can review the storage status, including pictures, videos, sound and other films storage capacity, total capacity and remaining capacity.
3.7 Java™ You can download Java program from the website, and operate it on your MP. 1. In the idle screen, press [LSK] to enter into the menu. 2. Press [direction navigation key] to scroll to [Java™], then press [OK] for confirmation (or directly press [number key 7]). Display Java application list in your MP, you can press [up and down navigation key] to display all application programs. (In the idle screen, hold [RSK] (over 2 seconds) to display Java application list) 1.
9. Permission In Java program list interface, press [LSK] for pop-up menu, select Permission to review the Permission of the program operating, you can modify the Permission. 10.Proxy setting In Java program list interface, press [LSK] for pop-up menu, select Proxy setting to review the Proxy setting screen. You can configure the use of proxy and proxy server address for Java Application Manager and Java Application; input IP address in the proxy server address, input port. 11.
2. Schedule 1. In "Accessory" list, press [direction navigation key] to scroll to "schedule", then press [OK] for confirmation to schedule and record the planned affairs. At the scheduled time, your MP will send out prompt tone to notify you. 2. In calendar, display current date; press [direction navigation key] to move the icon to select desired dates, the caption column provides the calendar year and month of the current date. The date of scheduled event will be displayed in red (others in blue). 3.
2. Press [direction navigation key] to enter into the list, select "exchange currency", "target currency", then select "exchange rate" and "amount". 3. The screen will display result. 4. Press [RSK] to exit to "Currency exchange" screen. 5. PC synchronization PC Tool is a convenience function for user. It can transfer data in phonebook or other rings and pictures that user prefer by data line which is a special accessory. Steps to use it: 1.
4. Reference Information Input Text The MP provides many kinds of expedient text input methods matching other functions, including T9 English, T9 Italian, ABC, 123 number input methods. - English/ Italian input: press [LSK] to switch over the input methods, select "T9 English".
5. Repair Guideline You are welcome to use the MP produced by NEC. In case of any problem of e353 MP in use, please contact the distributor or NEC repair center. In case of repair, please send your MP to local repair station (see the Warranty Certificate attached with MP); in case of no repair station locally, please send your MP and duplicate invoice to the distributor for EMS. To inquire about the latest repair outlet and replacement center address, please contact 800-820-7007, or http://www.necmobile.
