User's Manual

89
the Backup/Restore screen.
STEP 15:Select Server Address.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 16:Enter an IP address of the FTP/TFTP server
which stores the backup file. For example, to
set the IP address of 10.41.208.205, enter
10*41*208*205 [separate with an asterisk
(*)].
After entering an IP address, press or
OK soft key.
STEP 17:The display goes back to the Backup/Re-
store screen. Select Data Restore.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 18:The default file name will be displayed as fol-
lows:
1
2
[FTP Settings]
3
OKBack

Folder
User ID
Password
3
3
1
2
[Backup/Restore]
3
4
OKBack

Data Backup
Data Restore

5
FTP Settings
Protocol
Server Address
[Server Address]
OKBack
BK
1
‘*‘For‘.‘
.
.
.
2
2
1
2
[Backup/Restore]
3
4
OKBack

Data Backup

5
FTP Settings
Protocol
Server Address
Data Restore