User's Manual

87
STEP 5: Select a protocol used by the server which
stores the backup file.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press or key, and then press or OK soft
key.
STEP 6: The display goes back to the Backup/Re-
store screen.
When FTP is selected here, go to the
next Step (STEP 7).
When TFTP is selected here, go to the
next STEP 15.
STEP 7: Select FTP Settings.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 8: Select User ID.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 9: Enter a User ID by using digit keys, then
press or OK soft key.
1
2
[Backup/Restore]
3
4
OKBack

Data Backup
Data Restore

Server Address
5
FTP Settings
Protocol
1
2
1
2
[Protocol]
OK
Back
TFTP

FTP
1
2
5
5
1
2
[Backup/Restore]
3
4
OKBack
Data Backup
Data Restore

Server Address
5
Protocol
FTP Settings
1
1
1
2
[FTP Settings]
3
OKBack

Password
Folder
User ID