User's Manual

141
OUTGOING TRUNK QUEUING
If Trunk Is Busy
STEP 1: Receive Trunk Busy indication. Press CALL
BACK. Call is placed in queue for next avail-
able trunk.
STEP 2: When trunk is available, setting station is
alerted by ringing and flashing red LED.
STEP 3: Press key or lift handset. Dial tone is
heard or number is automatically dialed if
Least Cost Routing is provided.
OFF-HOOK TRUNK QUEUING
STEP 1: Press key, receive dial tone.
STEP 2: Dial desired telephone number. Encounter a
trunk busy condition.
STEP 3: Station user receives service set tone and
leaves speaker on.
STEP 4: The desired number is automatically dialed
when a trunk becomes available.
EXECUTIVE OVERRIDE
If Called Station Is Busy
STEP 1: Press OVERRIDE.
STEP 2: Interrupted parties receive warning tone.
STEP 3: Three-way conference is initiated.
STEP 4: Conf LED lights.
Using Soft Key
STEP 1: Press E-OVR Soft Key.
STEP 2: Interrupted parties receive warning tone and
three-way conference is initiated.
DT730/710
DT330/310
Speaker
OG-Q SET
1:25 PM MON 12 JUL 2010
DT730/710
DT330/310
Speaker
Note:
The Conf key is accommodated on only DTL-2E-
1, ITL-2E-1 and DTL-6DE-1.
DT730/710
DT330/310
Overridden station
OVERRIDE 2001
1:25 PM MON 12 JUL 2010
CONF
1:25 PM MON 12 JUL 2010
OVERRIDE 2001
MIC >>>
1:25 PM MON 12 JUL 2010