User Manual
Table Of Contents
- Front cover
- Table of Contents
- Introduction
- Important Information
- 1. Check the product overview, supplied items and part names
- 2. Projecting an Image (Basic Operation)
- 2-1. Flow of Projecting an Image
- 2-2. Connecting Your Computer/Connecting the Power Cord
- 2-3. Turning on the Projector
- 2-4. Selecting a Source
- 2-5. Adjusting the Picture Size and Position
- 2-6. Correcting Keystone Distortion [KEYSTONE]
- 2-7. Optimizing Computer Signal Automatically
- 2-8. Turning Up or Down Volume
- 2-9. Turning off the Projector
- 2-10. When Moving the Projector
- 3. Convenient Features
- 4. Using On-Screen Menu
- 5. Making Connections
- 6. Using the VIEWER
- 7. Connecting to a Network
- 8. Maintenance
- 9. Appendix
- 9-1. Setting Up the Screen and the Projector
- 9-2. Compatible Input Signal List
- 9-3. Specifications
- 9-4. Cabinet Dimensions
- 9-5. Pin assignments and signal names of main terminals
- 9-6. PC Control Codes and Cable Connection
- 9-7. About the ASCII Control Command
- 9-8. Troubleshooting
- 9-9. Indicator Message
- 9-10. Setting the date and time in the projector
- 9-11. Troubleshooting Check List
- 9-12. REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico)
3. Convenient Features
41
13. Press the ◀ or ▶ button to highlight the
[OK] and press the ENTER button.
This completes the Cornerstone correction.
• Selecting [CANCEL] will return to the ad-
justment screen without saving changes
(Step 3).
• Selecting [RESET] will return to the factory
default.
• Selecting [UNDO] will exit without saving
changes.
14. Press the EXIT button a few times to turn
off the menu.