User Manual
Table Of Contents
- Front cover
- Table of Contents
- Introduction
- Important Information
- 1. Check the product overview, supplied items and part names
- 2. Projecting an Image (Basic Operation)
- 2-1. Flow of Projecting an Image
- 2-2. Connecting Your Computer/Connecting the Power Cord
- 2-3. Turning on the Projector
- 2-4. Selecting a Source
- 2-5. Adjusting the Picture Size and Position
- 2-6. Correcting Keystone Distortion [KEYSTONE]
- 2-7. Optimizing Computer Signal Automatically
- 2-8. Turning Up or Down Volume
- 2-9. Turning off the Projector
- 2-10. When Moving the Projector
- 3. Convenient Features
- 4. Using On-Screen Menu
- 5. Making Connections
- 6. Using the VIEWER
- 7. Connecting to a Network
- 8. Maintenance
- 9. Appendix
- 9-1. Setting Up the Screen and the Projector
- 9-2. Compatible Input Signal List
- 9-3. Specifications
- 9-4. Cabinet Dimensions
- 9-5. Pin assignments and signal names of main terminals
- 9-6. PC Control Codes and Cable Connection
- 9-7. About the ASCII Control Command
- 9-8. Troubleshooting
- 9-9. Indicator Message
- 9-10. Setting the date and time in the projector
- 9-11. Troubleshooting Check List
- 9-12. REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico)
1
1-1. Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
General
• Liquid crystal type high brightness/high resolution projector
Model name Brightness Resolution Aspect ratio
P605UL 6,000 lm
WUXGA
(1920 × 1200 pixels)
16:10
P525UL 5,000 lm
WUXGA
(1920 × 1200 pixels)
16:10
P525WL 5,000 lm
WXGA
(1280 × 800 pixels)
16:10
• A proprietary sealed structure that achieves highly dust-proof performance
Due to its excellent dust-proof performance, the projector is not equipped with a filter. Filter
replacement is therefore unnecessary.
• Silent design utilizing a sealed structure
A silent design with no irritating fan noise even in a quiet conference room or classroom.
Light source · Brightness
• A long-life laser diode is equipped in the light module
The product can be operated at low cost because the laser light source can be used for a long
time without requiring replacement or maintenance.
• Brightness can be adjusted within a wide range
Unlike with ordinary light sources, the brightness can be adjusted from 30 to 100% in 1% incre-
ments.
• [CONSTANT BRIGHTNESS] mode
Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the
projector automatically controls the output from the light module according to the light module
used time for maintaining constant brightness.
1. Check the product overview, supplied items and part names