Desktop Monitor MultiSync E271N User’s Manual MODEL: M277D4 Please find your model name in the label on the rear side of the monitor.
Index WARNING.....................................................................................................................................English-1 CAUTION......................................................................................................................................English-1 Registration Information................................................................................................................English-2 Recommended use............................................
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
Registration Information Cable information CAUTION: Use the attached specified cables with this monitor so as not to interfere with radio and television reception. For mini D-sub 15 pin, please use a signal cable with ferrite core. For HDMI and DisplayPort, please use a shielded signal cable. Use of other cables and adapters may cause interference with radio and television reception. FCC Information 1. The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.
Safety Precautions and Maintenance WARNING FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER, AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Ergonomics To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects).
English Parts Name and Functions Control Panel LED Power Key Control buttons Refer to the Controls section. See page 11. Terminal Panel A AC IN Connector F Headphone Jack Connects with the supplied power cord. Connects with headphones. CAUTION: Do not connect headphones to the monitor while you are wearing them. Depending on the volume level, it may damage to your ears. B DisplayPort IN DisplayPort signals input. C HDMI IN Digital HDMI signals input.
Quick Start For box contents, please refer the printed contents sheet provided in the box. To attach the base and cable holder to the LCD stand: 1. Place monitor face down on a non-abrasive surface (Figure 1). 2. Please rotate the stand 90 degrees as shown in Figure 1. CAUTION: Handle with care when pulling the stand. It may pinch your fingers. 3. Attach the base to the stand, then tighten the screw at the base’s bottom (Figure 2). NOTE: Reverse this procedure if you need to re-pack the monitor. 4.
3. Place hands on each side of the monitor to tilt the LCD panel to a maximum tilt angle and lift up to the highest position. English 4. Connect all cables to the appropriate connectors (Figure C.1). Maximum Tilt Headphone Highest Stand Position DisplayPort HDMI D-SUB Audio IN Power cord Figure C.1 NOTE: Incorrect cable connections may cause abnormal operation, damage display quality/components of the LCD module and/or shorten the module’s life.
8. Turn on the monitor by touching the power key and then the computer (Figure E.1). 9. No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. For further adjustments, use the following OSD controls: • AUTO CONTRAST (Analog input only) • AUTO ADJUST (Analog input only) Refer to the Controls section of this User’s Manual for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.
English Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. Contact NEC for more information. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. CAUTION: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor. See page 15 for details. Remove the monitor stand before mounting. 1.
Re-attaching the original stand Reverse the process in the previous section to re-attach stand. NOTE: Match “TOP SIDE” mark on stand to top side of the monitor when re-attaching stand. “TOP SIDE” mark Please match top side of the monitor Attaching VESA Plate for Thin Client Computer This LCD monitor is designed for mounting a thin client computer by using a VESA plate and screws. When attaching the VESA plate, use all included screws and fully tighten them.
English Controls OSD (On-Screen Display) Control Functions 1. Basic functions of the touch keys on the front of the monitor – OSD Menu + SELECT INPUT/RESET Not displaying on screen Shortcut to Brightness. Shortcut to Volume. Displays OSD. Displaying on screen Icon Select Moves leftward. Moves rightward. Displays OSD menu and selects function icon. Displaying on screen Function Adjustment Adjusts down. Adjusts up. Adjusts the function of the selected icon. NOTE: Selects input signal.
VOLUME Controls the volume of the speakers or headphones. To mute the speaker output select Audio icon and touch “INPUT/RESET” key. BRIGHTNESS Adjusts the overall image and background screen brightness. Touch “INPUT/RESET” key to enter ECO MODE. ECO MODE OFF: Sets brightness variable from 0% to 100%. ECO MODE1: Sets brightness 70%. ECO MODE2: Sets brightness 30%. NOTE: When DV MODE is ON, ECO MODE is set to OFF and cannot be changed. CONTRAST Adjusts the image brightness in relation to the background.
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings except MUTE, CARBON SAVINGS, CARBON USAGE, and SIGNAL INFORMATION. Individual settings can be reset by highlighting the control to be reset and touching the INPUT/RESET key. EXIT Selecting EXIT allows you to exit OSD menu/sub menu. TOOL EXPANSION Selects the zoom mode. This function works when the input signal timing is under native resolution.
OSD TOOL LANGUAGE Selects the language used by the OSD. OSD TURN OFF The OSD menu will stay on as long as it is in use. You can select how long the monitor waits after the last key touch to shut off the OSD menu. The preset choices are 10-120 seconds by 5-second increments. OSD LOCK OUT This control completely locks out the access to all OSD control functions except for VOLUME, BRIGHTNESS and CONTRAST.
Monitor Specifications MultiSync E271N Monitor Notes LCD Module 68.6 cm/27.0 inches 68.6 cm/27.0 inches 1920 x 1080 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.311 mm dot pitch; 250 cd/m2 white luminance; 1000:1 contrast ratio (typical), (5000:1 Contrast ratio, DV MODE ON). Digital RGB DisplayPort V1.1a (HDCP 1.
Major supported timings Resolution H V 640 x 480 720 x 350 720 x 400 720 x 480 720 x 576 800 x 600 1024 x 768 1280 x 720 1280 x 960 1280 x 1024 1440 x 900 1680 x 1050 1920 x 1080 1920 x 1080 NOTE: Vertical Frequency 60/72/75 Hz 70 Hz 70 Hz 60 Hz 50 Hz 56/60/72/75 Hz 60/70/75 Hz 50/60 Hz 60/75 Hz 60/75 Hz 60 Hz 60 Hz 50 Hz 60 Hz Notes SVGA XGA HD 720 Quad-VGA SXGA WXGA+ WSXGA+ FHD FHD Recommend When the selected monitor resolution is not a native panel resolution, the text contents appearance in the mon
3-side Narrow Bezel: Stylish appearance and less distance between adjacent screens in a multi-monitor setup. Fully Ergonomic Stand: Provides viewing flexibility with 130 mm height adjustment, -5 ~ 35-degree tilt, 170-degree swivel to both right/left directions, with cable management and a small footprint. The bottom of the monitor cabinet can touch the stand base for lower positioning requirements.
Troubleshooting No picture • Make sure the signal cable is fully connected to both the monitor and the computer. • Make sure the computer’s display card is fully seated in its slot. • Do not use a DisplayPort converter adapter. This device is not supported. • Make sure both the computer and monitor power switches are in the ON position. • Make sure that a Major Supported Timings has been selected for the display card in the system being used.
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentallyfriendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
