Manualshelf

Server User's Guide

ManualsBrandsNEC ManualsServer140He
51525354555657585960
2-29
CD-ROM in the CD-ROM drive.
2. Press the Eject button on the front of the CD-ROM drive.
The tray comes out a little.
3. Hold the tray lightly and pull it out toward you until the tray stops.
4. Put the CD-ROM on the tray carefully and securely with the date recorded surface facing toward the tray.
5. As shown in the figure below, hold the tray with a hand and press the CD-ROM with fingers of another hand
to make the hole of the CD-ROM fit to the rotor at the centre of the tray.
Roto
r
Press this part of
CD-ROM.
6. Push the front of the tray lightly to retract it into the drive.
IMPORTANT: If a noisy sound in driving the CD-ROM drive occurs after setting a
CD-ROM, set it again correctly.