Electronics America Server User's Guide

Service Processor 3-31
FV (Firmware Versions)
Execution:
This command can be executed in the AC POWER ON or DC POWER ON state.
Function:
Displays the version information of the iSPFW and BIOS.
Performs a checksum of the storage area.
Note: The FV command can be executed in Normal mode or
Maintenance mode.
Table 3-32. FV Screen
Screen Image Reference
iSPyz:---> fv<ENTER>
Firmware Versions : (currently running firmware is Rxx.xx)
iSP BOOT (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
iSP FW bank0 : xx.xx generated on mm/dd/yyyy hh:mm:ss
iSP FW bank1 (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
BIOS bank (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
A
Do you want to check the flash memory? (y/[n]) : y<ENTER>
B
checking iSP BOOT bank...
passed.
checking iSP FW bank0...
passed.
checking iSP FW bank1...
passed.
checking BIOS bank...
passed.
C
FV command terminated.
Table 3-33 FV Screen References
Reference Description
A Displays the state of the current FW storage area.
B To perform a checksum test of the storage area, enter “y”.
C Displays the state of the checksum test.