User's Manual

47
CONTACTS
To add the Work Address, scroll to the Work Address field, then
press the Left Soft Key [Set]. Enter the street, city, state, zip
code, and country, then press the Center Select Key [OK].
To add the company name, scroll to the Company field, then
enter the company name (up to 32 characters).
To add a title, scroll to the Title field, then enter the title (up to 32
characters).
To add the birthday, scroll to the BirthDay field, then press the
Left Soft Key [Set]. Enter the birthday, then press the Center
Select Key [OK].
To remove the added birthday, press the Right Soft Key
[Remove] with the BirthDay field selected.
To add notes, scroll to the Notes field, then enter the notes (up to
30 characters).
6. Select the entered phone number field and press the Right Soft
Key [Options] to select one of the following options:
Set Speed Dial/Set As Default/Add 2-Sec Pause/Add Wait
To add the Contact entry to the Speed Dial list, press  Set
Speed Dial. Select the desired Speed Dial digit by using the
keypad or by scrolling to highlight it, then press the Center Select
Key [SET]. Press the Center Select Key [OK] to select Yes.
To set the phone number as the Default Number, press  Set
As Default, then press the Center Select Key [OK] to select Yes.
To add a pause to an existing number, press  Add 2-Sec
Pause or  Add Wait.
NOTE
The initial phone number entered when the new Contact is created
becomes the Default Number. If more than one number is entered
for the Contact entry, another number can be selected as the
Default Number.
•
•
•
•
•
•
•
•