User's Manual

156

SETTINGS & TOOLS

5. Enter the new four-digit code in the Enter New Code field.

If you selected Calls & Services in step 4, you would also need to

enter the current code before entering the new code.

6. Press the Directional Key  down to advance to the Re-enter

New Code field.

7. Enter the new four-digit code again as confirmation.

8. Press the Center Select Key [SET].

NOTE

There are two Lock Codes: Phone Only and Calls & Services.

Restrictions

Use the following procedure to configure Location Setting, Calls,

Messages, and Dial-Up Modem restrictions.

1. From idle mode, press the Center Select Key [MENU], select

Settings & Tools, then press the Center Select Key [OK]. Press

 Phone Settings,  Security.

2. Enter the four-digit Lock Code, then press the Center Select Key

[OK]. The default Lock Code is the last 4 digits of your mobile

telephone number.

3. Press  Restrictions.

4. Enter the four-digit Lock Code, then press the Center Select Key

[OK].

5. Select one of the following setting and then press the Center Select

Key [OK].

Location Setting: Unlock Setting/Lock Setting

Calls: Incoming Calls/Outgoing Calls

For Incoming Calls, set Allow All/Contacts Only/Block All.

For Outgoing Calls, set Allow All/Contacts Only/Block All.

Messages: Incoming Messages/Outgoing Messages

For Incoming Messages, set Allow All/Block All.

For Outgoing Messages, set Allow All/Block All.