User's Manual

129
SETTINGS & TOOLS
Astro Calendar: Phase of the Moon
Star Gazer: Star constellations at random
G’zGEAR
®
automatically ends after 3 minutes of inactivity with the
flip closed.
•
Set Up
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Tools.
2. Select G’zGEAR, then press the Center Select Key [OK], 
Setup.
3. Select one of the following options:
G_SWITCH: Enables switching of tools by shaking the handset
to the left with the flip open. See page 35 for information on the
Motion Detection function. (On/Off)
Save Last Mode: Displays the previously displayed mode when
starting a tool. (On/Off)
Backlight: Keeps the display backlight on while G’zGEAR
®
is
active. (On/Off)
Pedometer: Counts your steps with the pedometer. (On/Off)
Calibration: Calibrates the electronic compass.
Restore Defaults: Returns G’zGEAR
®
settings to initial value.
How To Use
You can display how to use G’zGEAR
®
.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Tools.
2. Select G’zGEAR, then press the Center Select Key [OK], 
How To Use.