User's Manual

25
Getting Started with Your Phone
Warning!
Hold the Wall Charger power plug horizontally and carefully
insert it into the Handset Charging Cradle.
Whenever placing the cellphone into or
removing it from the Handset Charging
Cradle, hold the cradle steady as shown in
the figure to the right. Slide the cellphone
along the guides on the cradle back
support.
The Charge Indicator is turns red while
charging. Even if the cellphone is inserted in the Handset
Charging Cradle, the cellphone will not charge if the Charge
Indicator does not turn on. Firmly insert the cellphone into the
Handset Charging Cradle until you see the Charge Indicator
illuminate.
Do not connect Wall Charger to the Charging/Data Port, when
a cellphone is charging in the charging cradle. Damage or
overheating may result.
Charging the battery by directly connecting the Wall
Charger
You can also charge the battery by directly connecting the Wall
Charger to the Charging/Data Port and plugging the power plug into
an electrical outlet.
1. To open the Charging/Data Port cover,
insert your finger tip into the notch near
the Charging/Data Port cover and pull the
cover to open.