User's Manual

68
Push to Talk
is unavailable to accept a PTT call, an “Unavailable” message will
appear on your display.
5. When the called party finishes speaking, you will hear the “Floor
Available” tone and the “Connected to” screen will appear on
your display.
6. Press and hold the PTT Key  to talk.
7. Release the PTT Key  to let the other party talk.
8. Press the End/Power Key to end the call. Otherwise, it will
automatically time out after ten (10) seconds of inactivity.
Incoming PTT Call
Incoming PTT (Barge)
1. When your cellphone receives a barge call, you will hear the
calling party speaking through the speakerphone. The calling
party’s cellphone number will appear on your display. If the
calling party’s number has already been registered in your PTT
Contact List, the contact name will replace the cellphone number
on the display.
2. Press and hold the PTT Key  to talk.
3. Release the PTT Key  to let the other party talk.
4. Press the End/Power Key to end the call. Otherwise, it will
automatically time out after ten (10) seconds of inactivity.
Incoming PTT (Alert)
1. When your cellphone receives an alert, you will hear the “PTT
Alert” tone. The message “Incoming Alert” will be displayed
with the cellphone number or contact name of the calling party.
The PTT Alert tone repeats every 5 seconds until you answer or
ignore the call. If you do not answer an incoming alert within 20
seconds, the PTT call will be automatically disconnected.