User's Manual

67
Push to Talk
Calling from Keypad (Barge)
1. From the idle screen with the flip open, enter the 10-digit
cellphone number of the Verizon Wireless PTT subscriber you
wish to contact.
2. Press and hold the PTT Key . Wait until the “OK to Talk”
tone sounds and the message “Talking to” appears on the
display. Speak while holding the PTT Key .
If the cellphone number you entered has already been registered
in your PTT Contact List, the contact name will replace the
cellphone number entered on the display when you initiate the
call by pressing the PTT Key .
3. Release the PTT Key  to let the other party talk.
4. Press the End/Power Key to end the call. Otherwise, it will
automatically time out after ten (10) seconds of inactivity.
Calling from Keypad (Alert)
1. From the idle screen with the flip open, enter the 10-digit
cellphone number of the Verizon Wireless PTT subscriber you
wish to alert.
2. Press the Left Soft Key [Alert].
3. Press and release the PTT Key  to alert the individual.
The “PTT Outgoing Alert” tone will sound, and “Alerting” will
appear on the display.
If the cellphone number you entered has already been registered
in your PTT Contact List, the contact name will replace the
cellphone number entered on the display when the alert is
initiated.
4. If the called party answers the alert, “Listening to” appears on the
display and you will hear the called party speaking.
If the called party chooses to ignore the alert, or if the cellphone