User's Manual

65
Push to Talk
of the called party. Your Push to Talk service cannot be used for any
applications that tether your phone to computers or other devices
for any purpose. Push to Talk-capable phone and service required.
Making a PTT Call
You can make two types of PTT calls:
A barge call automatically connects to the other party. The called
party does not have the option to ignore the call.
An alert call is a call to notify a called party that the calling party
want to talk with using a tone. The called party has the option to
answer or ignore the call.
Calling from PTT Contact List (Barge)
1. From the idle screen with the flip either open or closed, press the
PTT Key  to access your PTT Contact List.
2. Scroll to highlight the PTT Contact entry you wish to call.
3. Press and hold the PTT Key . Wait until the “OK to Talk”
tone sounds and the message “Talking to” appears on the
display. Speak while holding the PTT Key .
4. Release the PTT Key  to let the other party talk.
5. Press the End/Power Key to end the call. Otherwise, it will
automatically time out after ten (10) seconds of inactivity.
Calling from PTT Contact List (Alert)
You can send an alert to any user with Verizon Wireless PTT service.
The user may answer or ignore the alert.
1. From the idle screen with the flip open, press the PTT Key
 to access your PTT Contact List.
2. Scroll to highlight the PTT Contact entry you wish to call.
•
•