User's Manual

51
CONTACTS
Phone Numbers with Pauses
Pauses are used for automated systems (e.g. voicemail or calling
cards). Insert a pause after a set of numbers then enter another set.
The second set of numbers is dialed after the pause. This feature
is useful for dialing into systems that require a code. There are two
different types of pauses you can use when registering a phone
number:
Wait (W): The cellphone stops dialing until you press the Left Soft
Key [Release] to advance to the next number.
2-Sec Pause (P): The cellphone waits 2 seconds before dialing
the next set of numbers automatically.
Registering a Phone Number with Pauses
1. From the idle screen with the flip open, enter the phone number.
2. Press the Right Soft Key [Options], then press  Add 2-Sec
Pause or  Add Wait.
3. Enter additional number(s) (e.g. PIN number or credit card
number).
4. Press the Right Soft Key [Options], then press  Save to
Contacts,  Add New Contact.
5. Perform steps 4 through 8 under “Adding a new Contact from the
idle screen” on page XX, to add and save the Contact entry.
•
•