User's Manual

149

SETTINGS & TOOLS

2. Enter the four-digit Lock Code, then press the Center Select Key

[OK]. The default Lock Code is the last 4 digits of your mobile

telephone number.

3. Press  Restrictions.

4. Enter the four-digit Lock Code, then press the Center Select Key

[OK].

5. Select one of the following settings:

Location Setting: Unlock Setting/Lock Setting

Calls: Incoming Calls/Outgoing Calls

For Incoming Calls, set Allow All/Contacts Only/Block All.

For Outgoing Calls, set Allow All/Contacts Only/Block All.

Messages: Incoming Messages/Outgoing Messages

For Incoming Messages, set Allow All/Block All.

For Outgoing Messages, set Allow All/Block All.

Dial-Up Modem Allow/Block

Phone Lock Setting

This setting specifies whether the cellphone should be locked

whenever it is turned on.

Lock Mode prevents the unauthorized use of your cellphone.

Once the cellphone is locked, it is in restricted mode until the Lock

Code is entered. You can receive a phone call and still make an

emergency call. You can modify the Lock Code using the new Lock

Code within the Security menu.

1. From the Phone Settings submenu, press  Security.

2. Enter the four-digit Lock Code, then press the Center Select Key

[OK]. The default Lock Code is the last 4 digits of your cellphone

number.

3. Press  Phone Lock Setting.