User's Manual

148
SETTINGS & TOOLS
NOTE
The default Lock Code is the last 4 digits of your cellphone
number.
1. From the Phone Settings submenu, press  Security.
2. Enter the four-digit Lock Code, then press the Center Select Key
[OK].
3. Press  Edit Codes.
4. Select one of the following settings, then press the Center Select
Key [OK].
Phone Only: Allows you to edit the Lock Code for the cellphone
only.
Calls & Services: Allows you to edit the Lock Code for all Calls
& Services.
5. Enter the new four-digit code in the Enter New Code field.
If you selected Calls & Services in step 4, you would also need to
enter the current code before entering the new code.
6. Press the Directional Key / down to advance to the Re-enter
New Code field.
7. Enter the new four-digit code again as confirmation.
8. Press the Center Select Key [SET].
NOTE
There are two Lock Codes: Phone Only and Calls & Services.
Restrictions
Use the following procedure to configure Location Setting, Calls,
Messages, and Dial-Up Modem restrictions.
1. From the Phone Settings submenu, press  Security.
I