User's Manual

62
Push to Talk
5. When the called party is finished speaking, you will hear the
“Floor Available” tone and the “Connected to” screen will appear
on your display.
6. Press and hold the PTT Key  to talk.
7. Release the PTT Key  to let the other party talk.
8. Press the End/Power Key to end the call. Otherwise, it will
automatically time out after ten (10) seconds of inactivity.
Incoming PTT Call
Incoming PTT (Barge)
1. When your cellphone receives a barge call, you will hear the
calling party speaking through the speakerphone. The calling
party’s cellphone number will appear on your display. If the
calling party’s number is saved in your PTT Contact List, the
contact name will replace the cellphone number on the display.
2. Press and hold the PTT Key  to talk.
3. Release the PTT Key  to let the other party talk.
4. Press the End/Power Key to end the call. Otherwise, it will
automatically time out after ten (10) seconds of inactivity.
Incoming PTT (Alert)
1. When your cellphone receives an alert, the “PTT Alert” tone will
play. The message “Incoming Alert” will be displayed with the
cellphone number or contact name of the calling party. The PTT
Alert tone repeats every 5 seconds until it is answered or ignored.
If you do not answer an incoming alert within 20 seconds, the
PTT call will be automatically disconnected.
2. Answer or ignore the alert:
To answer the alert, press and hold the PTT Key
 and begin
talking.