User's Manual

46
CONTACTS
5. Perform steps 5 through 8 under “Adding a new Contact from the
idle screen” on page XX, to update and save the Contact entry.
When the phone number you selected is already registered,
CONTACT SAVED appears on the display. The phone number
reappears on screen. Press the End/Power Key to exit, or press
the Send Key to make a call to the displayed phone number.
Phone Numbers with Pauses
Pauses are used for automated systems (e.g. voicemail or calling
cards). Insert a pause after a set of numbers then enter another set.
The second set of numbers is dialed after the pause. This feature
is useful for dialing into systems that require a code. There are two
different types of pauses you can use when registering a phone
number.
Wait (W): The cellphone stops dialing until you press the Left Soft
Key [Release] to advance to the next number.
2-Sec Pause (P): The cellphone waits 2 seconds before dialing
the next set of numbers automatically.
Registering a Phone Number with Pauses
1. From the idle screen, enter the phone number.
2. Press the Right Soft Key [Options], then press  Add 2-Sec
Pause or  Add Wait
3. Enter additional number(s) (e.g. pin number or credit card
number).
4. Press the Right Soft Key [Options], then press  Save to
Contacts,  Add New Contact.
5. Perform steps 4 through 8 under “Adding a new Contact from the
idle screen” on page XX, to add (or update) and save the Contact
entry.
•
•