User's Manual

145

SETTINGS & TOOLS

Calls: Incoming Calls/Outgoing Calls

For Incoming Calls, set Allow All/Contacts Only/Block All.

For Outgoing Calls, set Allow All/Contacts Only/Block All.

Messages: Incoming Messages/Outgoing Messages

For Incoming Messages, set Allow All/Block All.

For Outgoing Messages, set Allow All/Block All.

Dial-Up Modem Allow/Block

Phone Lock Setting

This setting specifies whether the cellphone should be locked

whenever it is turned on.

Lock Mode prevents the unauthorized use of your cellphone. Once

the cellphone is locked, it is in restricted mode until the Lock Code

is entered. You can receive phone calls and still make emergency

calls. You can modify the Lock Code using the new Lock Code

within the Security menu.

1. From the Phone Settings submenu, press  Security.

2. Enter the four-digit Lock Code, then press the Center Select Key

[OK]. The default Lock Code is the last 4 digits of your mobile

telephone number.

3. Press  Phone Lock Setting.

4. Select one of the following settings, then press the Center Select

Key [SET].

Unlocked: Your cellphone is unlocked.

On Power Up: Your cellphone will lock when it is turned on.

Lock Phone Now

1. From the Phone Settings submenu, press  Security.

2. Enter the four-digit Lock Code, then press the Center Select Key

[OK]. The default Lock Code is the last 4 digits of your mobile