User's Manual

Volume Quick Adjustment

Use the side keys on the right side of the phone to adjust the earpiece

and master volumes.

NOTE

Key beep volume is adjusted through the Menu.

NOTE

You can press (Down Side Key) for 3 seconds to set Sounds Off

mode. Press (Up Side Key) to switch to Normal Mode.

Call Waiting

While a call is in progress, two beeps indicate another incoming call.

When Call Waiting is enabled, you may put the active call on hold

while you answer the other incoming call. Check with your cellular

service provider for information about this function. To use Call

Waiting:

1. Press to receive a waiting call.

2. Press again to switch between calls.

Caller ID

Caller ID displays the number of the person calling when your phone

rings. If the caller’s identity is stored in Contacts, the name appears on

the screen. Check with your service provider to ensure they offer this

feature.

Quick Access to Convenient Features

G’zOne Type-S

Vibrate Mode

Vibrate Mode mutes key tones and activates the vibration mode to

alert you of an incoming call or message. To activate Vibrate Mode

from standby mode, press and hold .

Lock Mode

Use Lock Mode to prevent others from using your phone. When Lock

Mode is set, your 4-digit password is required to use the phone.

NOTE

The lock code/password is the last 4 digits of your phone number.

1. To lock your phone from standby mode, press and hold .

2. To unlock your phone press Right Soft Key [Unlock], then

enter your 4-digit password.

Mute Function

If you press Mute during a call, the person you are speaking with

cannot hear you or any sounds from your side of the conversation.

However, you can still hear them. To activate Mute:

1. During a call, press Left Soft Key [Mute].

2. To unmute, press Left Soft Key [Unmute].

G’zOne Type-S