User's Manual

17
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press c.
Use a to select Function and then press
c (Select).
Use j to select Sound/Vib/Lamp and then
press c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select (Ringtone) and then press
c (Select).
Use j to select Original and then press
c (Select).
Use j to select a ring tone and then press
c (Set).
The incoming ring tone is set.
If you press & (Play), the tone plays.
Press % (OK).
•
➡
➡
➡
➡
➡
➡
➡
•
➡
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
Use a to select Function and then press
c (Select).
Use j to select Sound/Vib/Lamp and then
press c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select (Ringtone Volume) and
then press c (Select).
Use j to adjust the volume and then press
c (Set).
Each press of j changes the volume one step.
STEP ↑
The ring tone volume gradually increases.
STEP ↓
The ring tone volume gradually decreases.
Level5
↕
Level1
The ring tone sounds at the set volume.
OFF
The ring tone does not sound.
Press % (OK).
➡
➡
➡
➡
➡
➡
•
➡