User Manual

17
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press .
Use to select Function and then press
(Select).
Use to select Sound/Vib/LED and then press
(Select).
Use to select Incoming Setup and then press
(Select).
Use to select Incoming Call and then press
(Select).
Use to select
(Ringtone) and then press
(Select).
Use to select Original and then press
(Select).
Use to select a ring tone and then press
(Set).
The incoming ring tone is set.
If you press (Play), the tone plays.
Press (OK).
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press .
Use to select Function and then press
(Select).
Use to select Sound/Vib/LED and then press
(Select).
Use to select Incoming Setup and then press
(Select).
Use to select Incoming Call and then press
(Select).
Use to select
(Ringtone Volume) and
then press (Select).
Use to adjust the volume and then press
(Set).
Each press of changes the volume one step.
STEP
The ring tone volume gradually increases.
STEP↓
The ring tone volume gradually decreases.
Level5
󱽘
Level1
The ring tone sounds at the set volume.
OFF
The ring tone does not sound.
Press (OK).