User's Manual
19
Getting Started with Your Phone
sDo not forcibly insert the microSD card into the microSD card slot.
Hold the card so that the terminals of the phone and the microSD
card are facing each other, and carefully insert it.
sDo not use your nail or like when sliding the microSD card.
Otherwise personal injury or damages on the microSD card, and/or
phone may result.
sFailure to completely reseal the battery cover after installing the
memory card may result in damage if the phone is exposed to
water.
1. Remove the battery cover and the battery.
For instructions on how to remove the battery cover and the battery,
refer to steps 1 through 3 of “Installing and removing the battery” on
page 14.
2. Hold the microSD card so that the terminals of
the phone and the microSD card are
facing each other, and carefully insert the
microSD card into the microSD card slot,
as shown in the right figure.
7. Install the battery and replace the battery cover, making sure to slide
the Battery Cover Lock to the LOCK position.
sFor instructions on how to install the battery and the battery cover,
refer to steps 3 through 6 of “Installing and removing the battery”
on page 14.