User's Manual

3
Continued on next page
Voice/Videophone Calls
■ To set Hyper Clear Voice→ p.14
■ To switch a voice/videophone call during a
call→ p.5
■ To put the current voice/videophone call
on hold→ p.18
■ To switch between the FOMA terminal and
Bluetooth device
Xr (1 second or longer)
■ When 2in1 is in Dual mode
The Outgoing number selection screen appears.
Select a phone number.
3
To end the call, press y
N
<Voice call>
z The Power saver mode is activated if you do not
execute key operations for 15 seconds during a
call.
<Videophone>
z Videophone using the rear camera is not
available.
z If you make a videophone call to an emergency
number (110, 119 or 118) from the FOMA
terminal, the call automatically changes to a voice
call.
z You cannot receive i-mode mail or MessageR/F
during a videophone call (you can receive SMS).
Received mail is stored at the i-mode center and
can be retrieved using “Check new messages”
after the videophone call.
z During battery charge, if the videophone call and
1Seg recording are running simultaneously, the
camera-off message may appear and the Camera
may be turned off automatically depending on the
FOMA terminal temperature. The substitute image
appears on the other party’s screen.
z Digital communications charges apply when the
substitute image is displayed during a videophone
call.
Videophone
You can use the videophone call function
between terminals that support the DOCOMO
videophone system.
z DOCOMO’s Videophone is compliant with the
3G-324M*2 international standard established
by the 3GPP*1 (the 3rd Generation Partnership
Project that sets standards for 3rd generation
mobile communications systems). Connections
with videophones using different standards
cannot be made.
*1: 3GPP (3rd Generation Partnership Project)
A regional standardization body established to
develop commonly applied technical
specifications for 3rd-generation mobile
communications systems (IMT-2000).
*2: 3G-324M
An international standard for 3rd-generation
mobile videophones.
■Guide to the videophone screen
①Main screen (Camera image of the other party
is displayed by default)
②Sub-screen (Your own camera image is
displayed by default)
③Last call duration
④Settings
: Hyper Clear Voice (Low/High)
: Voice being transmitted/Transmission
error
: Video being transmitted/Transmission
error
: Camera image/Substitute image/
Chara-den being transmitted
: Handsfree ON/OFF
: Muting
: Visual check in progress
: Photo mode (Portrait)
*1
: Key operation mode (DTMF
mode
*2
/Whole action mode
*3
/Part
action mode
*3
)
*1 : You cannot change the Photo mode.
*2 : “Send DTMF tone/DTMF tone OFF” →p.4
*3 : “Using Chara-den”→ p.23
1
3
4
2