Datasheet

The Nebra AnyBeam is a low cost, high definition laser projector that can fit in your
pocket.
Conventional projectors tend to be big, hot, noisy, use a lot of power, require focus
adjustment, and aren't very portable. These issues are solved by laser and high speed
two-dimensional scanning by adopting the MEMS scanner.
MEMS is a device that uses latest micro-fabrication technology and integrates
mechanical structure and electronic circuits. The Nebra AnyBeam projects a high
resolution image of HD (720p @ 60 Hz) by reflecting the three colour laser by high
speed driving of the MEMS mirror, and scanning the horizontal and vertical two
dimensional directions.
Since the laser is adopted as the light source, it is not affected by the unevenness of the
projection surface and the curved surface. In addition, it is also possible to use a ceiling
and other places where it is hard to install a normal display, or signage on a non-flat
wall.
Pocket size
Watch on any surface
100+ inch screen-size
No need to focus
Plug in any device with HDMI compatibility
Fanless
Bulbless
Features
Focus Free
In conventional projectors, it's necessary to adjust the focus. The Nebra
AnyBeam uses a laser that travels straight and hardly spreads. It's always
influenced by the distance, the unevenness of the projected surface, and the
curved surface, so it is always in focus.
No Bulb
The Nebra AnyBeam utilises a MEMS scanner which means no bulb is
required.
High Colour Reproducibility
By adopting semiconductor lasers of three colours R, G, and B as light
sources, the projector displays a wide colour gamut and colourful images.
Low Noise
With operating noise 0 and low heat generation, adopting a laser with high
electro-optical conversion efficiency and a MEMS scanner eliminates the
need for a cooling fan, which was indispensable for conventional projectors.
It can be applied more freely without worrying about operation sound even
in digital signage and embedded applications.