Quick Start Guide

OUTDOOR HOTSPOT QUICK START GUIDE
Outdoor Hotspot Quick Start Guide
Chapter 1: Hardware Setup
Box Contents
Your Nebra Outdoor Helium Hotspot comes with the following items:
• The Nebra Helium Outdoor Hotspot
• 3 dBi N-Type Glass Fiber Antenna
You will need a power source such as a DC Power Supply, or provide both combined power
and network connection by using Power Over Ethernet with the unit.
Warnings
Please remember to follow the following steps when using your Nebra Outdoor Hotspot.
• Never power on the Outdoor hotspot without it’s antenna connected as this may dam-
age the unit.
Preparing Your Nebra Outdoor Hotspot
This section will be written soon.
Conguring Your Nebra Outdoor Hotspot
To congure your Hotspot you will require the Helium Network application installed on a Mo-
bile Phone and for you to have gone through the account setup process to continue.
Step 1: Open the Helium application and login, then press hotspots.
Step 2: Next click Set up Hotspot , from here you will want to select Nebra Outdoor Hotspot.
Step 3: After following the steps on the App to get to this page, Push the button on the back
of the unit once to enable pairing and then press scan on the App.
Step 5: Press the entry for your hotspot in the app, you can check it is the correct one by
matching the last 6 characters shown in the application with the last 6 characters of the mac
address printed on the sticker on the bottom of the hotspot.
Step 6: The app will show the available Wi-Fi networks within range of your Hotspot.
If you are using Ethernet, tap Use Ethernet Instead and skip to Step 7.
If using Wi-Fi, tap on the name of your Wi-Fi network on the app which will bring you to the
following screen.
Type in your Wi-Fi’s network password then tap Connect and it should connect to your wi-
network.
Step 7: The app will then ask for you to set your hotspot’s location.
1 Nebra LTD. 2021