D8 | D9 | D10 User guide
Meet your Neato Intelligent Robot Vacuum Congratulations for choosing the Neato robot vacuum. Your Neato is designed from the ground up to deliver unparalleled performance and ease of use that will revolutionize your vacuuming experience. We know you are excited to start using your Neato. Please take a few moments to read this manual and become familiar with your Neato to ensure you get the most benefit from using it.
Table of contents Getting to know your Neato robot.......................................................................................3 Preparing to use your Neato robot......................................................................................5 Connecting to the MyNeato app...........................................................................................6 Selecting a cleaning mode on the MyNeato app...........................................................
Getting to know your Neato robot 12 1 18 6 7 16 8 2 9 13 a 19 3 10 4 14 11 20 15 5 21 17 1 Power adapter (detachable supply unit) 2 Laser cover 3 Top 4 Dirt bin and filter 5 Handle 6 Charge base 12 Brush 18 Brush guard 7 Battery icon 13 Wall following sensor window 19 Battery door 8 Wi-Fi icon 14 Side brush 20 Bum rollers 9 Play button 15 Wheels 21 Cleaning tool 10 Info button 16 Drop sensor window 11 Front bumper 17 Charging contacts ENGLISH 3
BATTERY LED WHEN THE NEATO ROBOT IS… Off the charge base On the charge base BATTERY LED COLOR AND BEHAVIOR MEANING (BATTERY CAPACITY LEVEL) Green Battery level is full. Ready to clean. Yellow Battery level is low. Move to charge base. Steady red Battery level is critically low. Move to charge base. Fast blinking red Battery has a fault and must be serviced. Steady green Battery power is at full charge. Ready to clean. Slow pulsing green Battery power is at medium and battery is charging.
Preparing to use your Neato robot Before you start using your Neato, perform Checking the battery the setup instructions in this chapter. Your Neato battery comes partially charged. Before you use your Neato for the first time, position it at the charge base and allow the robot to charge until the battery LED becomes green (up to 3 hours). Positioning the charge base Before positioning the charge base, select a clear area with good Wi-Fi coverage.
Connecting to the MyNeato app IMPORTANT NOTE: You must connect your Neato to the MyNeato app before using your robot vacuum. The MyNeato app allows you to: 1. Confirm that the charge base is positioned properly and within good Wi-Fi coverage. • Start and pause your Neato when you are not home 2. Use this QR Code to download the MyNeato app from the Internet to your phone. 3. On your phone settings, turn on Bluetooth communication. 4.
Selecting a cleaning mode on the MyNeato app Cleaning modes Extra Care navigation Before you start, cleaning either with the MyNeato app or manually, you can select a cleaning mode to determine how your robot vacuum cleans. In addition to the listed cleaning modes, your Neato supports an Extra Care navigation feature that is useful if you have especially delicate furniture. This feature is enabled from the same page on the MyNeato app where you select cleaning modes.
Cleaning with the MyNeato app Using the MyNeato app to clean Your Neato cleans the entire floor plan on one level, moving automatically from room to room. From the app you can start cleaning, pause, resume, and cancel to return to charge base. To clean a house: 1. Remove small objects and loose cords from the floor. 2. Make sure that your Neato is placed at the charge base. 3. Tap to start cleaning. 4. Tap to pause cleaning. 5. Tap Resume to continue cleaning. 6.
Creating a Floor Plan Map and No-Go Zones Creating a Floor Plan Map Creating No-Go Zones Creating a floor plan map of your house allows you to set up No-Go Zones, so you can tell your Neato which areas of your house you want to avoid cleaning. No-Go Zones allow you to tell your Neato to avoid areas that should not be cleaned, such as a child’s play area or a dog bowl. After your Neato performs its first cleaning using the MyNeato app, it creates a map of your house automatically.
Schedule cleaning Routines and locating your Neato robot Creating Routines to schedule cleanings Locating your Neato robot You can schedule your Neato to clean an entire house on certain days and times by creating a Routine. There may be times when your Neato becomes stuck or stops at an unknown location in your house. When you tap your Neato will make a sound which will guide you to find its physical location. To set up a Routine: 1. Select 2. Tap in the MyNeato app. to add a new Routine. 3.
Manually operating your Neato robot NOTE: Before you start manual cleaning for the first time, you must connect your Neato to the MyNeato app. See Connecting to the MyNeato App. Cleaning an entire house To clean your house, confirm that the Play LED is white. You can initiate cleaning by pressing once. Your Neato robot will clean the entire floor on one level automatically moving room to room.
Maintaining your Neato robot For reliable operation, check and clean your Neato robot’s brushes and empty its dirt bin after every use or as needed, depending on your environment. Failing to do this maintenance may impact your Neato’s performance and may void your warranty coverage. Emptying dirt bin and cleaning filters After each use, empty the dirt bin, clean the airways and opening, and clean the filter. To remove the filter, pinch the handle and pull out.
Cleaning the top of the Neato robot Cleaning the sensors Clean the top of your Neato and the area around the laser top with a soft cotton cloth. Use a dry cotton swab to clean the three drop sensor windows on the bottom of your Neato.
Neato Robotics®, Inc. 50 Rio Robles San Jose, CA 95134, USA NeatoRobotics.
