Use and Care Manual

16
DIRT BIN AND FILTERS
After each use, empty the dirt bin, clean
the airways/opening, and filter. To remove
the filter, pinch the handle and pull out.
Replace the filter every 1 to 2 months or
more frequently as needed.
Use the hair/fiber blade to cut, and remove
hair from the brush. Remove any debris
from the brush ends and inside the brush
cavity where the brush sits. Re-insert the
brush, and replace the brush guard. It is
recommended to clean the brush monthly.
IMPORTANT
Your robot needs regular maintenance
to operate reliably. This means checking/
cleaning the brushes and emptying the
dirt bin after every use or as needed,
depending on your environment. Failure
to do this may cause problems with your
robot and impact your robot’s performance
and void your warranty coverage.
BRUSHES
Remove the side brush, and set aside.
Then, remove the brush guard by pulling
up on both sides.
PULL UP ON
BOTH SIDES
SIMU LTAN EOUS LY
Filter Comb
Hair/Fiber
Cutter
Maintaining Your Neato Robot