Use and Care Manual

15
Neato Botvac D6 Connected has the
capabilities to store up to 3 floor plans. To set
up additional floor plans, follow these steps.
Place the charge base in the location where
you want to set up the new floor plan. Put the
robot on the charge base.
Tap on the arrow beside
the existing floor plan.
A drop down menu will
open. Select “Add a new
floor plan”. Follow the
instructions to create
a second floor plan.
Remember to name and
save your floor plan when
complete. Once created,
you will be able to add No-Go Lines to the
new floor plan.
Multiple Floor PlansCleaning with
No-Go Lines
To clean with No-Go Lines enabled, the
robot must start from the charge base and
the cleaning must be initiated from the
Neato app. Press the Start button on the
app, or schedule a cleaning on the app.
NOTE:
• After each cleaning, tap the
, to see a
Cleaning Summary which shows where
the robot has cleaned on the coverage
map.
• To use No-Go Lines, the charge base
must stay in the original location where
the floor plan was created.
• If cleaning is initiated using the Start
button on the robot, Amazon Alexa,
Google Home, Chatbots, or IFTTT, it
will not adhere to the No-Go Lines
boundaries.
Launch the Neato App and tap the
“Tri-Bar” symbol in the left upper corner.
Select the “MY FLOOR PLAN” option.