Use and Care Manual

15
Cleaning with
No-Go Lines
To clean with No-Go Lines enabled, the
robot must start from the charge base and
the cleaning must be initiated from the
Neato app. Press the Start button on the
app, or schedule a cleaning on the app.
NOTE:
• After each cleaning, tap the , to see a
Cleaning Summary which shows where
the robot has cleaned on the coverage
map.
• To use No-Go Lines, the charge base
must stay in the original location where
the floor plan was created.
• If cleaning is initiated using the Start
button on the robot, Amazon Alexa,
Google Home, Chatbots, or IFTTT, it
will not adhere to the No-Go Lines
boundaries.