Board- User Guide

Marker holder
2x Marker
1x 2,5mm hex wrench
Everything you need
Neat Board comes with everything you
need to get started, including cables and
the chosen mounting option.
MOUNTING OPTIONS:
Neat Board Floor Stand (optional)
Can be used with or without wheels
2x M6 screw, 3 in (75mm) 1x 5mm hex wrench
12x M4 screw, 0.3 in (8mm) 1x 3mm hex wrench
4x Wheels
Neat Board Table Stand (Included)
2x M6 screw, 2.4 in (60mm)
1x 5mm hex wrench
IN THE BOX:
Neat Board: All-in-one collaboration system
Ethernet cable: 16.4ft (5m)
Power cord: 9.9ft (3m)
Neat Board Wall mount (optional)
VESA compatible
2x M6 screw, 0.8 in (20mm)
1x 5mm hex wrench
Screws for mounting to the wall are not included.
Mounting on a wall should only be performed by
qualified personnel in line with applicable facility and
state regulations. The wall and the mounting equipment
must safely withstand the load of the product.