Neat Bar Pro & Neat Pad User Manual
Neat Bar Pro Video conferencing device Neat Bar Pro packs a stack of tech into a simple and elegant slimline device. It’s capable of driving three large screens, has two extreme resolution cameras, a multiple microphone array and three full-range speakers. Ideal for delivering superior-quality audio, video, and other unique capabilities to your huddle, focus, meeting, and conference rooms, Neat Bar Pro comes with a dedicated Neat Pad controller and integrated environmental sensors.
Simple setup All you need is in the box, including mounts, cables and clear instructions. So it’s easy for anyone to install and set-up, above or below one, two or three screens.
Neat Bar Pro Neat Bar comes with everything you need to get started, including cables, wall mount, screen mount and table stand. In the box Neat Bar Pro: Video conferencing device HDMI cable: 6.5ft (2m) Ethernet cable: 9.8ft (3m) Power cord: 9.8ft (3m) Mount adapter, wall mount, screen mount and table stand Wall mount Screen mount 4 × M8 screw (0.94 in / 24 mm) for VESA mount 4 × M6 screw (0.
Neat Pad Neat Pad works as a Controller for Neat Bar and can also be configured as a Scheduling Display for the Meeting Room. It comes with everything you need to get started, including cables and mounting options. In the box Neat Pad: 8-inch touch screen 2 × Ethernet cable: 9.8ft (3m) + 16.4ft (5m) PoE power adapter Mount adapter, side mount and wall mount Side mount Wall mount 4 × M4 screw (0.30 in / 7.5 mm) for the wall mount 3 × M4 screw (0.19 in / 4.7 mm) for the side mount 1 × 2.
Mounting & releasing Mounting Slide Neat Bar onto the selected mounting option (1). When fully inserted tilt Neat Bar back to horizontal and check if it is secure by carefully pulling it towards you. Releasing Tilt Neat Bar fully forward (1). Pull towards you (2) until the unit stops and the red release lever appears (3). Push the release lever up and pull Neat Bar gently off the mount adapter.
Size & weight Neat Bar Pro Width: 35.04 in (890 mm) Height: 3.15 in (80 mm) Depth: 3.15 in (80 mm) Weight: 6.83 pounds (3.1 kg) 35.04 in (890 mm) 3.15 in (80 mm) 3.15 in (80 mm) Neat Pad Width: 7.8 in (198 mm) Height: 1.7 in (42 mm) Depth: 5 in (127 mm) Weight: 1.15 pounds (520 g) 7.8 in (198 mm) 5 in (127 mm) 1.
Setup & connectivity Setup Requirements for a complete setup Use the provided cables to set up Neat Bar. Connect the cables according to the illustration. Cables marked are included. Cables marked are optional and not required for basic use of the system. Display Internet connection Video service WiFi AC power 9.8ft (3m) Cable Security lock slot Factory reset button Auxillary port (RJ45) USB-C Ethernet port 9.
