Bar with Pad- User Guide

Setup & connectivity
Setup
Use the provided cables to set up Neat Bar.
Connect the cables according to the illustration.
Cables marked are included. Cables marked
are optional and not required for basic use
of the system.
Requirements for
a complete setup
Display
Internet connection
Video service
Environmental Requirements
Ambient operating temperature:
32° to 95° F (0° - 35° C)
Storage temperature: 5° - 149° F (-15° - 65° C)
Relative humidity: 20% to 80%
Additional Product
Information
https://neat.no/bar
Neat Bar and Neat Pad - User Manual rev10
AC power
9.8ft (3m) Cable
Ethernet port
9.8ft (3m) Cable
USB-C
Factory reset button
HDMI-out for external screen
6.5ft (2m) Cable
HDMI-out for external screen
HDMI-in for screen sharing (1080p)
The 16.4ft (5m) Ethernet
Cable provided is not to
be used for in-wall
installation. In-wall cable
routing should only be
performed by qualified
personnel using
appropriate equipment.
USB-C Debug
Ethernet port
16.4ft (5m) Cable
Factory reset button
Power over Ethernet
(PoE)
Power adapter for AC
WiFi
Security lock slot
WiFi