Neat Bar & Neat Pad User Manual
Neat Bar Collaboration System Neat Bar is a compact and highly capable meeting device. Neat Bar includes Camera, Speakers, Microphones and environmental sensors all in one compact design. It’s perfect for bringing superior -quality audio and video to your huddle, focus and meeting spaces. Neat Bar comes with a dedicated Neat Pad Controller and optional Scheduling Display.
Simple setup All you need is in the box, including mounts, cables and clear instructions. So it’s easy for anyone to install and set-up, above or below one or two screens.
Neat Bar Neat Bar comes with everything you need to get started, including cables, wall mount, screen mount and table stand. In the box Neat Bar: All-in-one audio and video device HDMI cable: 6.5ft (2m) Ethernet cable: 9.8ft (3m) Power cord: 9.8ft (3m) Mount adapter, wall mount, screen mount and table stand Wall mount Screen mount 4 × M6 screw (0.94 in / 24 mm) for VESA mount 4 × M8 screw (0.
Neat Pad Neat Pad works as a Controller for Neat Bar and can also be configured as a Scheduling Display for the Meeting Room. It comes with everything you need to get started, including cables and mounting options. In the box Neat Pad: 8-inch touch screen 2 × Ethernet cable: 9.8ft (3m) + 16.4ft (5m) PoE power adapter Mount adapter, side mount and wall mount Side mount Wall mount 4 × M4 screw (0.30 in / 7.5 mm) for the wall mount 3 × M4 screw (0.19 in / 4.7 mm) for the side mount 1 × 2.
Mounting & releasing Mounting Slide Neat Bar onto the selected mounting option (1). When fully inserted tilt Neat Bar back to horizontal and check if it is secure by carefully pulling it towards you. Releasing To release Neat Bar from the selected mounting option, tilt the unit to maximum tilt (1) and carefully slide the unit towards you (2). Warning: Do not leave Neat Bar in a max tilted position with the red indicator showing as it is not secured by the lock spring.
Size & weight Neat Bar Width: 21.9 in (556 mm) Height: 3 in (76 mm) Depth: 3 in (76 mm) Weight: 3.75 pounds (1.7 kg) 21.9 in (556 mm) 3 in (76 mm) 3 in (76 mm) Neat Pad Width: 7.8 in (198 mm) Height: 1.7 in (42 mm) Depth: 5 in (127 mm) Weight: 1.15 pounds (520 g) 7.8 in (198 mm) 5 in (127 mm) 1.
Setup & connectivity Requirements for a complete setup Setup Use the provided cables to set up Neat Bar. Connect the cables according to the illustration. Cables marked are included. Cables marked are optional and not required for basic use of the system. Display Internet connection Video service WiFi AC power 9.8ft (3m) Cable Security lock slot Factory reset button Ethernet port 9.8ft (3m) Cable HDMI-out for external screen 6.
