User's Manual

8 WALL Family User manual NE41 12005- 02 v2.0
5. Aer the inial “three green
blink”, the unit now starts to
blink red. The number of blinks
indicates the current radio posi-
on, i.e. 3 red blinks equals radio
posion 3.
1
2 3 4 5 6 7 8 1 2
6. To select radio posion, press
any buon, port or input.
7. The unit will conrm the
selecon by lighng green for 2
second.
8. Now acvate the radio transmit-
ter (e.g. press the red buon on
an ATOM).
9. The unit will conrm the succes-
ful recepon of the radio ID code
by lighng green for 2 seconds.
10. The unit now starts blinking
green, allowing the seng the
acon for relay 1.
1
2 3 4 5 6 1 2
The number of blinks indicates what
acon to set.
1 blink Pulse
2 blinks On
3 blinks O
4 blinks Toggle
5 blinks No acon
6 blinks Stop pulse
11. Press any port, buon or input at
the appropriate acon blink.
12. The unit now starts blinking red,
allowing the seng the acon
for relay 2 (see #10).
1
2 3 4 5 6 1 2
13. Acvate any port, buon or input
at the appropriate acon blink.
14. If successful, the LED rapidly
blinks green for 2 seconds.
At any stage during the manual
conguraon, if there is an
unsuccessful conguraon, the LED
will blink rapidly for 2 seconds.
When this happens the manual
conguraon is cancelled and it is
necessary to restart the procedure.