User's Manual

7WALL Family User manual NE41 12005- 02 v2.0
Both ports have a common ground
and must be connected to potenal
free contacts (see below).
Port 1
Port 1Port 2
If an inserted tele plug is removed,
the unit sends a Tamper alarm. If the
plug is inserted again the unit sends
a Tamper OK alarm.
Manual conguraon
(not valid for ROOM and ROOM+PEAR)
Any unit can be manually congured
regarding adding transmiers and
how the two relay outputs should
act when the added transier is
acvated.
The procedure is in short:
• Determine what posion to acvate
• Add the radio transmier
• Determine the acon when the
added transmier is acvated
Please read the following instrucon
carefully before aempng to
manually congure a radio
transmier.
1. Power o the unit (both 24VDC
and baeries must be removed)
2. Remove J2
3. Power on the unit and replace
the J2 within 5 seconds from
power on.
4. The LED blinks green 3 mes.