User's Manual

5WALL Family User manual NE41 12005- 02 v2.0
Item Denominaon
①
Place for 6.35 mm tele jack
connector/Pull cord/Key cylinder
② Jumper J2
③ Jumper J1
④ AAA-baery connectors
⑤ Screw connector
⑥ Product (data) label
The screw connector
The screw connector allows for con-
necng external power, inputs and
outputs by cable to the WALL unit.
10-28 VDC
Power
The unit can be powered either by
10-28V
DC
or 2 x AAA baeries.
Inputs IN1 and IN2
In the screw connector there are
two wired inputs, IN1 (pin 6) and IN2
(pin 5). Both inputs have a common
ground (pin 7) and must be con-
nected to potenal free contacts.
Input acvaon is ignored during the
rst 10 seconds aer start up.
Outputs OUT1 and OUT2
The outputs are galvanically sepa-
rated from the wired inputs and each
other and works according to below.
ROOM and ROOM+PEAR
The relay outputs acts according to
the sengs in the builn aconplan
or by a superior system (by radio).