User's Manual
Table Of Contents
D-POS User Manual NE41 07105-02 v1.0
7 Important
7.1 Safety Notes
• Read instrucons prior to use
• Always test the system per instrucons prior to use and always check the
funcon of the product aer making adjustments
• This product may not be suitable for all persons.
• This product should not be a substute for the roune visual monitoring
protocol by caregiver and must not be used in situaons where a delay in the
arrival of appropriate medical care, could lead to a potenally life-threatening
situaon.
• Our units are NOT intended for any life support device, thus intending a device
whose malfuncon may result in damage to a life.
• Check the device regularly and replace when necessary.
• Do not integrate to other systems other than those specied in this document.
• The product will not cause electromagnec disturbances under normal working
condions.
• The product can be placed near other products or devices as long as
mechanical vibraon is not present.
7.2 Use
• Use only original parts.
• Keep away from dust, moist and dirt.
• Do not drop, knock, twist or shake the device.
• Do not warm up the device or use it near re.
• The product may not be painted.
• For repairs, contact a NEAT dealer.
7.3 Cleaning
• All parts in the product kit can be cleaned with a mild soap soluon and a damp
cloth. Dry with a dry cloth.
• Strong chemicals, alcohol, grease and other harsh substances must not be used
when cleaning or handling the parts in the product kit.
• The product must be disconnected from the power socket before cleaning.
• Aer cleaning, control that the product works properly by sending a test alarm
to the alarm receiver/central.
7.4 Disposal
At the end of the product’s use life, please dispose of it at appropriate collecon
points provided in your country. For disposal or recycling informaon, please
contact your local authories or the Electronic Industries Alliance (EIA, www.eiae.
org). In the European Union, the bin label indicates that this product should not
be disposed of with household waste. It should be deposited at an appropriate
facility to enable recovery and recycling or returned to NEAT Electronics.
11