User's Manual

D-POS User Manual NE41 07105-02 v1.0
6 Walk Test Mode
To verify the size of the RFID eld, a walk test mode can be acvated with DIP
switch 8.
When a D-ATOM is inside the RFID eld, its LED will blink once per second. The
color of the D-ATOM LED indicates if it is congured to send an alarm when pass-
ing an RFID eld with the ID code and zone number transmied by D-POS: red for
alarm, green for no alarm.
During walk test mode D-ATOM will not make any transmission to D-DOOR, NEO
or TREX etc, so do not forget to return DIP switch 8 to OFF posion when RFID
eld check is done.
DIP 8 Walk Test Mode
ON Acve
OFF Not acve
Table 10. DIP 8 - Congure Walk Test Mode
10