Daim Ntawv Qhia Tus Neeg Siv

SDI/HDMI
NDI Video Encoder
2019
REV.1
Quick Start Guide
Thank you for purchasing NDI video encoder. Before installing the
product, please read this user manual carefully. Please strictly follow
our manual to install and use our encoder, or install and use under
guiding by professional person, to protect your body safety and to
avoid the encoder damage from physical and electrical. The encoder
may be damaged if incorrect electrical connection or the physical
installation, even threaten the operator safety.
Packing list
01
Packing list
Enc ode r*1 . WIF I an ten n a* 2 . Ad a pt o r*1 . US B-D C cab le* 1.
USB -RJ 45 a d apt or* 1. H ot s h oe r ack *1. H ot s hoe b rac ket * 1.
USB Ta lly* 1 . Ma nua l*1 . Warr ant y car d*1 .
The re w i ll b e som e di ff e re n ce b eca use o f th e upd ati ng o f the d ev i ce .
Note:
Device interfaces
02
Device installation and connection
03
Connecting video signal
Connect the SDI/HDMI signal from the source (such as a camera) to the
SDI/HDMI input port of the device via a cable
Connect Network
Plug the USB transfer network port (RJ45) cable into the USB port,
and connect the network port to the switch. You can also connect directly
to the computer network.
SDI/HDMI input
Battery/Charging indicator
Power ipput
SDI/HDMI indicator
Streming indicator
Streaming switch
Power indicator
Power switch
Antenna gain light
WIFI antenna interface
USB external interface
Reset button
WIFI status light
Connect the Power supply
Use the standard power adapter (DC 12v) connected to the power input. After
the power is turned on, the device will charge the built-in battery. Press the
power switch on the device for more than 3s, and the device will start working
immediately.
LED indicator
04
Long press the switch for more than 3s, the device is turned on,
the power light flashes, and the power light is always on. After
the device starts up normally, the power light is always on, and
the process lasts for 30-40s.
Indicator Status
Device login and network
configuration
06
Name
Power
indicator
SDI/HDMI
indicator
Battery
indicator
Streaming
indicator
WIFI
indicator
Antenna
gain light
Color
White
Status
Flicker
Always on
Extinguished
Always on
Extinguished
Charging status (flashing)
Always on
Extinguished
Always on
Flicker
Extinguished
Always on
Extinguished
Always on
Flicker
Description
Starting
OK
Power off
SDI/HDMI signal locked
SDI/HDMI no signal
Charging
Normal work
Shut down
Normal work
Connecting
Stop pushing
Normal work
WIFI disconnect
Normal work
Connecting
White
Red
Red
White
Extinguished
Disconnect
Red
Thi s p rod uc t is d iv ide d in to S DI o r HD MI i nt erf ac e,
Ple as e co nfi gu re b as ed o n wh at y ou p urcha se d.
Kindl y n ote : T hi s is onl y Q uic k S tart G ui de, if t he re a ny q ue st ions,
pleas e c ont ac t th e s upp li er o r v isi t w ebs it e fo r m ore de tai ls .
About built-in battery:
1.While the device is powered on, connected with the power adapter, the
device is powered by the adapter. The battery is not charging.
2.While the device is powered off, connected with the power adapter, the
battery will be charging.
1.While the device is powered on, the fan will start working when reaches a
certain temperature.
2.While the device is powered off, the fan is working while charging.
About fan :
Micro SD/ TF car d
Login the WEB Console
If login for the first time, please use Failsafe IP address
You can access http://192.168.1.168, to login the web console.
L o g i n u s e r n a m e a d m i n a d m i n p a s s w o r d
Default IP address and web login
The Failsafe IP address is with subnet mask192.168.1.168 255.255.255.0.
Normally, you don't need to modify this IP address.
IP address configuration
After login, you can configure the IP according to the network, the IP will be
use for pushing and device management. You can configure it to manually
set the IP or DHCP.( Default set is DHCP )
and are onl y f or c ust om ize d fu nc tio ns
Note:
NDI is a registered trademark of NewTek, Inc.
USB Tally
05
This unit supports Tally indication from any NDI switching
device by connecting the external Tally device that comes
in the package with the USB port of the encoder.
When the NDI source is output to NDI receivers such as VMIX, TriCaster,
etc. and when switch to Program or Preview, the encoder receives the
notification and changes the color on the "Tally" device, as shown in the
figure below: