Daim Ntawv Qhia Tus Neeg Siv

TALLY SUPPORT
Onboard Tally
Mini supports Tally within the NDI protocol. Tally is a
method of identifying which source is being used ‘on air’ at
any particular time.
Whenever a Mini source is being used on the program
output of an NDI compatible receiver that supports Tally
metadata, the screen will light up red on the front of the
Mini unit.
Program Tally
Mini also supports preview tally. The onboard screen will
light up green when the Mini source is placed in the preview
bus of the receiving switcher.
In the situation where the BirdDog source is loaded on both
the program and preview bus of the receiver the light will
be red.
Preview Tally
Tally border overlay on loop
Mini is capable of enabling Tally borders on the video loop
out. This feature is particularly useful for a camera setup
that has a video monitor attached.
The camera operator is able to quickly see if their camera is
being used in a current or preview shot in a live environ-
ment. This feature is enabled via the Video settings tab in
the web configuration panel.
Note the Tally borders now appear on the outside edges of
the external monitor and update in real time as you select
sources on your vision switcher.
Current video input:
Audiosetup:
Mute:
Tally:
Input selection:
AUTO/SDI/1080i/25.0/YUV
DASHBOARD NETWORK VIDEO CONFIG. SYSTEM LOGOUT
MINI
11